Authentic Best resources for HPE6-A70 Test Engine Practice Exam
[2021] HPE6-A70 PDF Questions - Perfect Prospect To Go With ActualTorrent Practice Exam
What is the cost of Aruba Certified Mobility Associate (HP HPE6-A70) Professional Exam
- Type of Questions: Multiple choice (MCQs), multiple answers.
- Number of Questions: 30
- Expiration: 2 years
- Duration of Exam: 3 days
- Lab Required: Yes
- No negative marking for wrong answers
- Language of Exam: English
Exam Topics for Aruba Certified Mobility Associate (HP HPE6-A70) Professional Exam
The following will be practiced in HP HPE6-A70 practice exam and HP HPE6-A70 practice tests:
- AP Provisioning
- Control and monitor Aruba solutions
- Aruba WLAN safe employee and guest solutions
- Functions, features, and capabilities of Aruba single-site on-premise enterprise solutions
- Dynamic RF Management
- WLAN basics and Aruba Architectures
- Guest Access
NEW QUESTION 21
Refer to the exhibit.
Which role must AP1 play?
- A. Mesh Point AP
- B. Instant AP (IAP)
- C. Mesh Portal AP
- D. Remote AP (RAP)
Answer: C
NEW QUESTION 22
Which class of controller is more appropriate in a branch installation with up to 64 APs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 23
An Aruba Remote AP (RAP) operates in split-tunnel mode. How does the AP forward traffic?
- A. It sends user and control traffic in two separate IPsec tunnels to the Mobility Controller (MC).
- B. It sends all user traffic in a GRE tunnel to a central Mobility Controller (MC), and it sends control traffic in an IPsec tunnel to the controller.
- C. It sends all employee and control traffic in a GRE tunnel to a central Mobility Controller (MC), and it bridges all guest traffic locally.
- D. It sends traffic designed to the corporate network in an IPsec tunnel to a central Mobility Controller (MC), and it bridges other traffic locally.
Answer: D
NEW QUESTION 24
A network administrator examines a list of 2.4GHz clients with low performance in the Mobility Master (MM) dashboard. Which property should pose a concern as a potential performance issue?
- A. Usage of 10 MB
- B. Goodput data rate of 12Mbps
- C. Radio PHY of HT 20MHz
- D. Max speed of 72Mbps
Answer: A
NEW QUESTION 25
Refer to the exhibit.
Based on the exhibit, what is the maximum number of APs that this Mobility Master (MM) solution can support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 26
An Aruba Mobility Master (MM)-based solution has two Virtual MM nodes, a primary and a backup node.
The solution must support 30 Virtual Mobility Controllers (VMCs) that will support a total of 960 APs.
Which VMC licenses meet the needs and DO NOT unnecessarily exceed them?
- A. one 1000 VMC license (MC-VA-1000)
- B. two 50 VMC licenses (MC-VA-50)
- C. two 1000 VMC licenses (MC-VA-1000)
- D. one 50 VMC license (MC-VA-50)
Answer: A
NEW QUESTION 27
What is one difference between captive portal authentication and 802.1X authentication?
- A. 802.1X authentication is typically implemented without encryption, while captive authentication is often combined with WPA or WPA2.
- B. 802.1X authentication always authenticates the wireless client, while captive portal authentication always authenticates the wireless user.
- C. 802.1X authentication occurs at Layer 2, while captive portal authentication occurs at Layer 3.
- D. 802.1X authentication must use an LDAP server, while captive portal authentication can use a RADIUS server or an LDAP server.
Answer: C
NEW QUESTION 28
A company has an Aruba solution with a guest WLAN named exam_guest. A network administrator creates the guest WLAN with the wizard and does not change any of the default roles. The authentication server does not send particular role assignments for authorized users. The company wants to deny guests access to specific IP ranges after the guest authenticate.
For which role should the administrator create the rule to deny this traffic?
- A. guest-logon
- B. exam_guest-guest-logon
- C. guest
- D. authorized
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 29
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba solution. Client 1 is assigned to the users1 role, and Client 2 is assigned to the users2 role. The exhibits show current firewall rules for those roles. The network1 alias used to be 10.1.1.0/24, but the network administrator now changes the network1 alias to 172.16.1.0/24. Client 1 and Client 2 both then send a packet destined to 172.16.1.10.
How does the firewall handle these packets?
- A. It permits the packet from Client 1 and denies the packet from Client 2.
- B. It denies both packets.
- C. It denies the packet from Client 1 and permits the packet from Client 2.
- D. It permits both packets.
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 30
Which pre-defined role allows DHCP, DNS, and internal captive portal redirection for a guest WLAN?
- A. guest-logon
- B. exam_guest-guest-logon
- C. guest
- D. authorized
Answer: A
NEW QUESTION 31
What is a role fulfilled by an Aruba Mobility Master (MM)?
- A. It provides an advanced Web portal for onboarding Bring Your Own Device (BYOD) devices.
- B. It forwards and routes traffic for wireless users across multiple sites.
- C. It terminates control tunnels for Aruba APs.
- D. It manages VLAN and routing configuration for multiple Mobility Controllers (MCs).
Answer: D
NEW QUESTION 32
A network administrator wants to use unique digital certificates installed on user devices to authenticate wireless users. Which EAP method should the RADIUS server and clients support?
- A. EAP-TLS
- B. EAP-TTLS and MS-CHAPv2
- C. LEAP
- D. PEAP and MS-CHAPv2
Answer: A
NEW QUESTION 33
A network administrator examines a list of 2.4GHz clients with low performance in the Mobility Master (MM) dashboard. Which property for a client should pose a concern as a potential performance issue?
- A. Usage of 10 MB
- B. SNR of 18
- C. Radio PHY of HT 20MHz
- D. Max speed of 72Mbps
Answer: B
NEW QUESTION 34
Refer to the exhibit.
The alias in the rule shown in the exhibit is network 10.1.1.0/24.
A wireless client is assigned IP address 10.1.2.10/24 and the "admins" role. The wireless client at 10.1.2.10 attempts to initiate a Web session with a server at 10.1.1.2. A wired client at 10.1.1.3 attempts to initiate an SSH session with the wireless client at 10.1.2.10.
How does the Aruba firewall handle these attempts?
- A. The firewall drops the traffic from the wireless client. The firewall drops the traffic from the wired client.
- B. The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall drops the traffic from the wired client.
- C. The firewall permits the traffic from the wireless client, but drops the return traffic from the server. The firewall drops the traffic from the wireless client.
- D. The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall permits the traffic from the wired client and also permits the return traffic from the wireless client.
Answer: D
NEW QUESTION 35
A company has an Aruba solution. A network administrator wants to prevent wireless users from accessing shopping web sites with a bad reputation.
What should the administrator set up to deny such traffic?
- A. firewall application rules
- B. application filters in the Traffic Analysis dashboard
- C. an AppRF engine
- D. firewall access control rules that specify HTTP and HTTPS services
Answer: A
NEW QUESTION 36
A network administrator creates the role employees and adds this rule to it:
user any any permit
The first several wireless clients assigned to the employees role are assigned IP addresses in the
10.10.10.0/24 subnet. Several other wireless clients with the employees role are then assigned IP addresses in the 10.10.20.0/24.
When the Aruba firewall matches traffic from these clients to the user any any permit rule, what does it do?
- A. It permits the traffic from wireless clients in the 10.10.10.0/24 subnet, but drops the traffic from wireless clients in the 10.10.20.0/24 subnet.
- B. It permits traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet as long as the packet has a source IP.
- C. It permits the traffic from wireless clients in the 10.10.20.0/24 subnet, but drops the traffic from wireless clients in the 10.10.10.0/24 subnet.
- D. It drops traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet.
Answer: B
NEW QUESTION 37
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba solution. Client 1 is assigned to the users1 role, and client 2 is assigned to the users2 role. The exhibits show current firewall rules for those roles. The network1 alias used to be 10.1.1.0/24, but the network administrator now changes the network1 alias to 172.16.1.0/24. Client 1 and Client 2 both send a packet destined to 172.16.1.10.
How does the firewall handle these packets?
- A. It permits the packet from Client 1 and denies the packet from Client 2.
- B. It denies both packets.
- C. It denies the packet from Client 1 and permits the packet from Client 2.
- D. It permits both packets.
Answer: A
NEW QUESTION 38
Refer to the exhibit.
A company has a Mobility Master (MM)-based solution with a guest WLAN. During the captive portal redirection, users who access a non-HTTPS Website see the error shown in the exhibit.
How can a network administrator prevent this error?
- A. Replace the default Mobility Master certificate with a certificate that has the correct hostname.
- B. Enable automatic CPSec certificate deployment.
- C. Replace the default server certificate for mobility controllers with a certificate signed by a trusted CA.
- D. Reconfigure the guest WLAN to use EAP methods that rely on passwords rather than certificates.
Answer: C
NEW QUESTION 39
What is one setting that a network administrator can configure for user roles in an Aruba solution?
- A. Maximum session
- B. ClientMatch rules
- C. DHCP pool
- D. source NAT
Answer: A
NEW QUESTION 40
A company has an Aruba Mobility Master (MM)-based solution. Where can a network administrator look to find a list of alerts about a variety of issues on the MM or managed devices?
- A. the Performance dashboard
- B. the top banner
- C. the Potential Issues dashboard
- D. the MM Maintenance pages
Answer: B
NEW QUESTION 41
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba solution. Client 1 is assigned to the users1 role, and Client 2 is assigned to the users2 role. The exhibits show current firewall rules for those roles. The network1 alias used to be 10.1.1.0/24, but the network administrator now changes the network1 alias to 172.16.1.0/24. Client 1 and Client 2 both then send a packet destined to 172.16.1.10.
How does the firewall handle these packets?
- A. It permits the packet from Client 1 and denies the packet from Client 2.
- B. It denies both packets.
- C. It denies the packet from Client 1 and permits the packet from Client 2.
- D. It permits both packets.
Answer: A
NEW QUESTION 42
What is a valid way to deploy an Aruba Mobility Master (MM)?
- A. as a subscription-based service through the Aruba cloud
- B. as a role on a Mobility Controller 7030 that is deployed as a standalone controller
- C. as a role on a Mobility Controller 7240 that is deployed as a master controller
- D. as a virtual appliance on a server that meets the recommended hardware requirements
Answer: D
NEW QUESTION 43
What is one reason for a network administrator to visit the Dashboard > Usage window on an Aruba Mobility Master (MM)?
- A. to analyze short terms trends in network usage by client, AP, and application
- B. to check license usage and determine the need for additional licenses
- C. to generate reports about traffic patterns and network usage over the past several months
- D. to view system usage statistics for the MM and troubleshoot potential issues
Answer: A
NEW QUESTION 44
Which IEEE standard provides the highest transmission rates in the 2.4GHz frequency band?
- A. 802.11g
- B. 802.11a
- C. 802.11n
- D. 802.11ac
Answer: C
NEW QUESTION 45
......
Best updated resource for HPE6-A70 Online Practice Exam: https://www.actualtorrent.com/HPE6-A70-questions-answers.html