2023 HPE6-A70 dumps review - Professional Quiz Study Materials
HPE6-A70 Test Prep Training Practice Exam Questions Practice Tests
What Are Details of HPE6-A70 Certification Exam?
To start off, test HPE6-A70 is available in some language options such as English, Latin American Spanish, and Japanese. To know more, the time given for completing the final test is usually 1 hour 30 minutes. There are 60 multiple-choice questions in total, which may include several scenario-based items. In addition, there may also be options where you need to fill in the blank. If you answer at least 70% of the questions correctly, you will obtain the Aruba Certified Mobility Associate (ACMA) certificate. Even though the difficulty of this exam might seem quite high, candidates should know that all items follow the concepts and topics that can be gained from work experience and training classes. As a rule, test HPE6-A70 is offered by HP through the Pearson VUE website. To schedule your exam, you also need to have an HPE Learner ID. If you don't have one, visit the certification page on the Hewlett Packard Enterprise site and click the “HPE Learner ID” link to know what to do next. Don't forget that you will need to pay $230 to take such a test.
NEW QUESTION 34
A network administrator wants to assign an authentication server group to the WPA2-Enterprise WLAN.
Which profile should the administrator modify?
- A. L2 Authentication
- B. Virtual AP
- C. SSID
- D. AAA
Answer: D
NEW QUESTION 35
Refer to the exhibits.
Exhibit 1
Exhibit 2
An Aruba solution supports a WLAN that uses WPA2-Enterprise security. Exhibit 1 shows the AAA policy for the WLAN. Users are supposed to be assigned to different roles after authentication. Network administrators test a connection with the employee user account. Exhibit 2 shows the status for the client after this test.
What is a possible reason for the issue shown in Exhibit 2?
- A. MAC authentication is enabled on the WLAN, and the test device does not have an authorized address.
- B. The RADIUS server is not correctly set up to send a user role for the employee account.
- C. The administrators entered the wrong password for the employee account.
- D. The shared key configured for the ClearPass server is incorrect.
Answer: B
NEW QUESTION 36
A network manager wants to implement an Aruba wireless solution that accommodates 802.1X with EAP-TLS. All wireless users will utilize Active Directory (AD) accounts to authenticate.
Which device will the authenticator forward the authentication requests to in this type of solution?
- A. Mobility Controller (MC)
- B. RADIUS server
- C. APs
- D. Mobility Master (MM)
Answer: B
NEW QUESTION 37
A network administrator needs to create an Aruba firewall rule that permits wireless users to receive DHCP settings when they first connect to the Aruba solution. What are the correct source and destination aliases for the rule?
- A. source = user and destination = user
- B. source = any and destination = user
- C. source = user and destination = any
- D. source = any and destination = any
Answer: D
NEW QUESTION 38
An Aruba Mobility Master (MM)-based solution has a WLAN that uses WPA2-Enterprise security. A test login on a wireless client fails.
How can a network administrator determine whether the RADIUS server rejected the credentials or another issue occurred?
- A. Use the MM AAA Server Test Diagnostic tool.
- B. View Technical Support information for the MM.
- C. Ping the IP address configured as the RADIUS server.
- D. Use the tools in the MM Dashboard > Security window.
Answer: A
NEW QUESTION 39
A company has an Aruba solution with a guest WLAN named exam_guest. A network administrator creates the guest WLAN with the wizard and does not change any of the default roles. The authentication server does not send particular role assignments for authorized users. The company wants to deny guests access to specific IP ranges after the guest authenticate.
For which role should the administrator create the rule to deny this traffic?
- A. exam_guest-guest-logon
- B. guest
- C. authorized
- D. guest-logon
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 40
Refer to the exhibits.
Exhibit 1
Exhibit 2
A network administrator configures a guest WLAN on an Aruba Mobility Master (MM)-based solution. The exhibits show some of the settings for this WLAN.
Which settings must the administrator configure on each Mobility Controller (MC) at the device level for this configuration to function properly?
- A. CPSec certificates
- B. VLAN 99 IP settings
- C. an IPsec preshared key
- D. a portal page
Answer: B
NEW QUESTION 41
A network administrator creates the role employees and adds this rule to it:
user any any permit
The first several wireless clients assigned to the employees role are assigned IP addresses in the
10.10.10.0/24 subnet. Several other wireless clients with the employees role are then assigned IP addresses in the 10.10.20.0/24.
When the Aruba firewall matches traffic from these clients to the user any any permit rule, what does it do?
- A. It drops traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet.
- B. It permits the traffic from wireless clients in the 10.10.20.0/24 subnet, but drops the traffic from wireless clients in the 10.10.10.0/24 subnet.
- C. It permits traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet as long as the packet has a source IP.
- D. It permits the traffic from wireless clients in the 10.10.10.0/24 subnet, but drops the traffic from wireless clients in the 10.10.20.0/24 subnet.
Answer: C
NEW QUESTION 42
A company has an Aruba solution and wants to provide guests with wireless access. The company wants to assign guests IP addresses in subnets that exist only within the Aruba solution.
Which feature should network administrators set up so guests can send traffic on the Internet without changes to the company routing solution?
- A. Create destination NAT rules for the guest role.
- B. Enable policy-based routing for the guest traffic.
- C. Set up a dynamic default gateway on the Mobility Controllers (MCs).
- D. Enable NAT on the VLAN assigned to the guest WLAN.
Answer: D
NEW QUESTION 43
A company has an Aruba solution that supports an employee WLAN. How can network administrators control in which subnets users receive IP addresses?
- A. Configure firewall policies that permit the desired subnet, and add them to the initial role for the WLAN.
- B. In the WLAN settings, configure User role rules with the desired subnet addresses as match criteria.
- C. Set the VLANs associated with desired subnets in the WLAN settings.
- D. Assign switch ports connected to APs to VLANs associated with the desired subnets.
Answer: C
NEW QUESTION 44
An Aruba solution runs ArubaOS 8 and uses a standalone controller architecture. Which feature can administrators use to optimize the channel and power plan for the APs?
- A. ARM
- B. AirMatch
- C. Rule Based Client Match
- D. AppRF
Answer: A
NEW QUESTION 45
Refer to the exhibit.
Which role must AP1 play?
- A. Instant AP (IAP)
- B. Mesh Point AP
- C. Remote AP (RAP)
- D. Mesh Portal AP
Answer: D
NEW QUESTION 46
Refer to the exhibit.
The exhibit shows the AAA profile for a WLAN on an Aruba solution. This WLAN uses 802.1X to authenticate users to a RADIUS server. A user successfully authenticates with 802.1X, but the RADIUS server does not send a role assignment.
How does the Aruba firewall handle the role assignment for this user?
- A. It assigns the logon role.
- B. It applies the Aruba VSA role employee.
- C. It assigns the authenticated role.
- D. It does not assign a role.
Answer: C
NEW QUESTION 47
Refer to the exhibits.
Exhibit 1
Exhibit 2
A company has an Aruba Mobility Master (MM)-based solution and needs a new WLAN for the corporate campus. A network administrator completes the creation of this WLAN, as shown in Exhibit 1. When the administrator tries to test a connection to the WLAN in various locations, the WLAN sometimes shows up in the list of WLANs on the client but sometimes does not. The administrator can see the WLAN in the list, as shown in Exhibit 2.
What is the error?
- A. The WLAN is configured as a hidden SSID.
- B. The WLAN is configured at a lower level in the Managed Network hierarchy.
- C. The Mobility Master (MM) does not have an active PEFNG license.
- D. The configuration is not deployed to the Mobility Controller (MC).
Answer: B
NEW QUESTION 48
A WLAN in an Aruba Mobility Master (MM)-based solution enforces Enterprise-WPA2 security and uses the tunnel forwarding mode. The company has an external RADIUS server.
Which device exchanges RADIUS packets with the RADIUS server?
- A. Mobility Controller (MC)
- B. access point (AP)
- C. wireless client
- D. Mobility Master (MM)
Answer: A
NEW QUESTION 49
A network administrator configures this policy:
Users to which this policy apply are unable to receive IP addresses with DHCP. How should the administrator fix the issue?
- A. Use the correct service alias in the user any svc-dhcp permitrule.
- B. Move the user any svc-dhcp permitrule to the bottom of the list.
- C. Change user to any in the user any svc-dhcp permitrule.
- D. Remove the deny rule from the policy.
Answer: A
NEW QUESTION 50
If the decrypt-tunnel forwarding mode is selected in an employee WLAN, where is the user traffic decrypted?
- A. at the switch
- B. at the AP
- C. at the RADIUS server
- D. at the controller
Answer: B
NEW QUESTION 51
What is an example of a Layer2 wireless threat that a wireless intrusion detection system (WIDS) should detect?
- A. 802.11 association floods
- B. RF jamming
- C. Bluetooth interference
- D. spyware
Answer: A
NEW QUESTION 52
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
A network administrator creates a guest WLAN on an Aruba Mobility Manager (MM). The exhibits show some of the settings for the WLAN. The administrator does not change the policies for those roles.
How does the firewall control guest clients when they first connect to the WLAN?
- A. It permits them to send any DHCP and DNS and it redirects all web traffic to a login portal.
- B. It does not permit them to send any traffic until they are authenticated.
- C. It permits them to send any DHCP and RADIUS traffic. It redirects all web traffic destined to the Internet to a login portal and drops web traffic destined to the private network.
- D. It permits them to send any DHCP traffic and DNS and web traffic to the Internet. It redirects web traffic destined to the private network to a login portal.
Answer: B
NEW QUESTION 53
Refer to the exhibit.
The exhibit shows output from a Mobility Master (MM) dashboard. What is a valid reason for the administrator to click the akamai square under applications?
- A. to set up bandwidth rule in order to control wireless user access to this application
- B. to create filter rules in order to control wireless user access to this application
- C. to see the break down for only the roles, destinations, WLANs, and devices that use this application
- D. to download a report about the usage of this application over time
Answer: C
NEW QUESTION 54
......
Exam Questions Answers Braindumps HPE6-A70 Exam Dumps PDF Questions: https://www.actualtorrent.com/HPE6-A70-questions-answers.html