[2022] 350-501 PDF Questions - Perfect Prospect To Go With ActualTorrent Practice Exam
Cisco 350-501 Pdf Questions - Outstanding Practice To your Exam
Exam Preparation
If you want to pass the Cisco 350-501 exam at the first attempt, it is essential to have a thorough preparation process. For this purpose, Cisco offers to take the Implementing and Operating Cisco Service Provider Network Core Technologies v1.0 course. This training option will give you all the information related to the configuration, verification, troubleshooting, and optimization of the Service Provider IP network infrastructures. Also, the applicants will have the required knowledge of the Service Provider technologies, including core architecture, networking, services, automation, quality of services, network assurance, and security. The candidates can take the SPCOR course in different ways of delivery. The instructor-led training will give them the equivalent of 3 days of self-study material and 5 days of hands-on lab practice. As for the e-learning option, they will have videos and questions that equivalent to 8 days of education.
Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam Certification Path
Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam is affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. This is the official prerequisite for this exam. However, the course, Integrating VPN Services from Cisco Service Provider, allows applicants to prepare for this exam and is highly recommended.
NEW QUESTION 64
Refer to the exhibit:
A network operator working for service provider with an employee id 3715 15:021 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
- A. Enable MPLS LDP on the interface
- B. Disable Cisco Express Forwarding globally
- C. Delete the static router ID
- D. Configure the both keyword to enable LDP globally
Answer: A
NEW QUESTION 65
Refer to the exhibit. The network team must implement MPLS LDP session protection with two requirements:
Session protection is provided for core loopback IP addresses only.
The LDP session must remain operational for one hour when the WAN link on PE-XR1 fails.
Which configuration must the team implement on PE-XR1?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 66
Refer to the exhibit.
Which show command shows statistics for the control plane policy and is used to troubleshoot?
- A. show control-plane
- B. show policy-map control-plane
- C. show policy control-plane
- D. show control-plane CoPP
Answer: B
Explanation:
NEW QUESTION 67
Refer to the exhibit:
R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1. these log messages are seen.
Which command can be configured on routers R1 and R2 on fO/O interfaces to form OSPF adjacency?
- A. ip ospf network broadcast
- B. ip ospf network point-to-point
- C. ip ospf network point-to- multipoint non-broadcast
- D. ip ospf network non-broadcast
Answer: B
NEW QUESTION 68
Refer to the exhibit.
An engineer is updating this network to meet these conditions:
* Area 10 will receive inter-area routes and support mutual redistribution of external routes with the extranet.
* The ::/0 route is prohibited in Area 10.
* Area 11 will receive only the ::/0 route from the ABR.
* External route redistribution is not supported in Area 11.
* The ABR in Area 11 will advertise no interarea routes.
Which two configurations must be performed to meet the requirements? (Choose two.)
- A. Configure area 11 as stub no-summary on R7 and as stub on XR31.
- B. Configure area 10 as stub on R9 and XR32.
- C. Configure area 10 as nssa on R9 and XR32.
- D. Configure area 11 as nssa default-information-originate on R7 and as nssa on XR31.
- E. Configure area 11 as nssa no-summary on R7 and as nssa on XR31.
Answer: A,C
NEW QUESTION 69
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
Explanation
Path Computation Element (Calculates paths through the network, keeps TE topology database information, sends path status updates) Path computation Client (sends path calculation request, sends path creation request) Path Computation Element (PCE) Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router's TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs
NEW QUESTION 70
Refer to the exhibit:
Router R1 and its peer R2 reside on the same subnet in the network, If does it make connections to R27
- A. R1 establishes UDP connections that are authenticated with a clear-text password
- B. R1 establishes TCP connections that are authenticated with an MD5 password
- C. R1 establishes TCP connections that are authenticated with a clear-text password
- D. R1 establishes UDP connections that are authenticated with an MD5 password
Answer: B
NEW QUESTION 71
Which statement about Network Services Orchestrator (NSO) is true?
- A. It must use SDN as an overlay for addressing
- B. It can be used only with XML coding
- C. It uses YANG modeling language to automate devices
- D. It is used only in service provider environments
Answer: C
NEW QUESTION 72
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- B. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- C. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- D. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
Answer: A
NEW QUESTION 73
You are testing the capabilities of MPLS OAM ping.
Which statement is true?
- A. An LSP breakage results in the ingress MPLS router never receiving any reply
- B. An LSP is not required for the reply to reach the ingress MPLS router
- C. MPLS OAM ping works solely with Cisco MPLS TE
- D. MPLS OAM ping works solely with P2P LSPs
Answer: B
NEW QUESTION 74
Refer to the exhibit.
An engineer is configuring an administrative domain in the given multi-vendor environment with PIM-SM. Which feature must the engineer implement so that devices will dynamically learn the RP?
- A. SSM
- B. BIDIR-PIM
- C. BSR
- D. Auto-RP
Answer: C
NEW QUESTION 75
How is a telemetry session established for data analytics?
- A. A router initiates a session using the dial-out to a destination.
- B. The destination initiate a session using the dial-out more to the router.
- C. A router requests the data using Teinet.
- D. A destination initiate a session to a router.
Answer: A
NEW QUESTION 76 
Refer to the exhibit. Which configuration prevents the OSPF neighbor from establishing?
- A. network statement
- B. mtu
- C. duplex
- D. default-metric
Answer: B
Explanation:
Section: Networking
NEW QUESTION 77
Refer to the exhibit.
A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A)
B)
C)
- A. Option C
- B. Option B
- C. Option A
Answer: A
NEW QUESTION 78
Which two tasks must you perform when you implement LDP NSF on your network? (Choose two.)
- A. Enable NSF for the link-state routing protocol that is in use on the network.
- B. Enable NSF for EIGRP
- C. Disable Cisco Express Forwarding
- D. Implement direct connections for LDP peers
- E. Enable NSF for BGP
Answer: A,E
NEW QUESTION 79 
Refer to the exhibit. A network engineer is implementing OSPF multiarea. Which command on interface G0/1 resolves adjacency issues in the new area?
- A. ip ospf network broadcast
- B. ip ospf network point-to-point
- C. ip ospf network point-to-multipoint
- D. ip ospf network non-broadcast
Answer: B
Explanation:
Section: Networking
Explanation/Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/118879-configure-ospf-
00.html#:~:text=When%20Multi%2DArea%20Adjacency%20is,which%20the%20ADJ%20is%20formed.
NEW QUESTION 80
Refer to the exhibit.
While troubleshooting the network, a network operator with an employee id: 3812:12:993 is trying to ping XR1. Which result should the operator expect when trying to ping to an XR1 local address?
- A. ICMP traffic works at a policed rate of 19 packets every 100 ms.
- B. All ICMP traffic is dropped.
- C. ICMP traffic works at a policed rate of 19 bytes per second every 100 ms
- D. All ICMP traffic responds successfully.
Answer: D
NEW QUESTION 81
A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION 82
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 83
Which BGP attribute is used first when determining the best path?
- A. AS path
- B. weight
- C. origin
- D. local preference
Answer: B
NEW QUESTION 84
Refer to the exhibit.
An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.
Answer:
Explanation:
NEW QUESTION 85
Refer to the exhibit:
Router 1 was experiencing a DDoS attack that was traced to interface gjgabitethernet0/1.
Which statement about this configuration is true?
- A. Router 1 accepts source addresses that have a match in the FIB that indicates it is reachable through a real interface
- B. Router 1 drops all traffic that ingresses interface gigabitethernet0/1 that has a FIB entry that exits a different interface
- C. Router 1 accepts all traffic that ingresses and egresses interface gigabitethernet0/1
- D. Router 1 accepts source addresses on interface gigabitethemet0/1 that are private addresses
Answer: A
NEW QUESTION 86
Refer to the exhibit:
In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
- B. R1 sends LSA type 2 only and R2 sends LSA type 1 only
- C. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
- D. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
Answer: A
NEW QUESTION 87
......
Online Questions - Outstanding Practice To your 350-501 Exam: https://www.actualtorrent.com/350-501-questions-answers.html
Practice To 350-501 - ActualTorrent Remarkable Practice On your Implementing and Operating Cisco Service Provider Network Core Technologies Exam: https://drive.google.com/open?id=16OC9xE13-whw1DcpaiOa0k1_reCUCbVK