[UPDATED 2023] Getting NACE-CIP2-001 Certification Made Easy!
NACE-CIP2-001 Exam Crack Test Engine Dumps Training With 100 Questions
The NACE-CIP2-001 certification exam is a widely recognized certification for coating inspectors who want to advance their careers or enhance their knowledge and skills in the field. The NACE-CIP2-001 certification exam is designed to test the knowledge and skills of coating inspectors, who are responsible for ensuring that coatings are applied correctly and meet industry standards. The certification exam covers a range of topics, including coating types, surface preparation, inspection procedures, and quality control measures.
NEW QUESTION # 19
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of:
- A. a), b), and c)
- B. Risk of acid or caustic splashes
- C. Risk of chemical exposure
- D. Risk of skin
Answer: A
NEW QUESTION # 20
An Inspection and Test Plan is required when:
- A. It is always required
- B. When the Owner specifies one
- C. When the Coating Applicator requests one
- D. When the Inspector requests one
Answer: A
NEW QUESTION # 21
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that another NACE Inspector would understand
- B. Language that the most would understand
- C. Language that only technical experts would understand
- D. Language that only in the project would understand
Answer: B
NEW QUESTION # 22
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Acid etching
- B. Sacking
- C. Stoning
- D. High-pressure water washing
Answer: B
NEW QUESTION # 23
In which type of concrete are laitance commonly encountered?
- A. Poured (wet cast)
- B. Concrete block (poured with a form)
- C. Glass fiber cement
- D. Gunite
Answer: A
NEW QUESTION # 24
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:
- A. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
- B. Correct the errors yourself and suggest the Level 1 inspector be replaced
- C. Correct the errors yourself and submit the reports without any further action
- D. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent
Answer: A
NEW QUESTION # 25
On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?
- A. Heat-shrink sleeves
- B. Coal Tar Enamel
- C. Concrete
- D. Liquid epoxies
Answer: D
NEW QUESTION # 26
Inspection and Test plans are developed by referencing:
- A. The Specification, SDS, relevant Standards and Codes
- B. The Specification, Safety Manual, Relevant Standards and Codes
- C. The Specification, TDS, relevant Standards and Codes
- D. The Specification, Application Guidelines, 'Relevant Standards and Codes
Answer: C
NEW QUESTION # 27
Centrifugal blast cleaning requires:
- A. The use of single use abrasives
- B. Well maintained blast wheels
- C. A large volume of air to propel the abrasive
- D. Very large nozzles
Answer: B
NEW QUESTION # 28
The coating applicator has ignored a enface preparation hold point and applied coating over the surface without a sign off from you as the inspector.
Your FIRST preferred course of action is to:
- A. Ignore the situation
- B. Stop the job
- C. Require the Applicator to remove the coating
- D. Advise the Owner and write a Non-Conformance report
Answer: C
NEW QUESTION # 29
Linings are used on the interior of pipelines to
- A. afford limited temperature insulation.
- B. reduce magnetic polarity.
- C. protect the transported product.
- D. provide protection against soil chemicals.
Answer: C
NEW QUESTION # 30
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:
- A. Review the specification with the other inspector to see what method was specified
- B. Advise your QC Manager to change the ITP to the use of the salt smart meter
- C. Redo the pre-cleaning based on the other inspectors results
- D. Advise the other inspector he is using an incorrect method
Answer: A
NEW QUESTION # 31
Inspector reports should always be copied to:
- A. The Contractor and Owner
- B. All parties involved in the project
- C. The Owner only
- D. Whomever the Owner identifies
Answer: D
NEW QUESTION # 32
A failure caused by applying a coating too thinly is known as
- A. chalking.
- B. cracking.
- C. failure to cure.
- D. pinholes.
Answer: D
NEW QUESTION # 33
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Flow stage
- B. Wetting stage
- C. Gel stage
- D. Cure stage
Answer: A
NEW QUESTION # 34
You should bulk store coatings containing isocyanates
- A. in a heated warehouse.
- B. in a well ventilated area separate from the work place.
- C. wherever it is convenient
- D. in a refrigerated warehouses
Answer: B
NEW QUESTION # 35
Surface preparation methods for Non-ferrous metals are:
- A. The same as for Ferrous metals
- B. Not required
- C. The same for all Non-FetT0us metals
- D. Specific for each type of Non-ferrous metal
Answer: D
NEW QUESTION # 36
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Defend the previous inspector
- B. Challenge the supervisor's authority
- C. Suggest to the Owner that the supervisor should be removed from site
- D. Express a willingness to work with the site team and follow the specification
Answer: D
NEW QUESTION # 37
In the event of a conflict between the Product Data Sheet and the Specification:
- A. It is up to the Applicator to decide which one to follow
- B. The Product Data Sheet prevails
- C. It is up to the Inspector to decide which one to follow
- D. The Specification prevails
Answer: D
NEW QUESTION # 38
The most likely area of failure on a buried external pipeline coating is the:
- A. Mainline coating
- B. Areas exposed to Ultra Violet light
- C. Field joint coating
- D. Ground bed
Answer: C
NEW QUESTION # 39
You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?
- A. SP 1 followed by SP 2
- B. SP 1 followed by acid etching
- C. SP 1 followed by caustic etching
- D. SP 1 followed by SP 3
Answer: A
NEW QUESTION # 40
The best choice of instrument for holiday testing of thick film concrete coatings is:
- A. Low Voltage Sponge Type
- B. High Voltage DC Pulse Type
- C. High Voltage DC Constant Current
- D. High Voltage AC
Answer: C
NEW QUESTION # 41
Antifouling coatings are regulated by international treaties.
- A. False
- B. True
Answer: B
NEW QUESTION # 42
Ideally, documentation requirements should be defined:
- A. In the specification
- B. By the contractor
- C. At the pre-job conference
- D. By the inspector
Answer: A
NEW QUESTION # 43
It is always possible to see moisture on a steel substrate:
- A. False
- B. True
Answer: A
NEW QUESTION # 44
......
NACE-CIP2-001 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://www.actualtorrent.com/NACE-CIP2-001-questions-answers.html
Obtain the NACE-CIP2-001 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass: https://drive.google.com/open?id=1cb2u0weRFobuskQKmaz_eBFlCOyCgsvq