Practice HPE6-A80 Questions With Certification guide Q&A from Training Expert ActualTorrent
Free HP HPE6-A80 Test Practice Test Questions Exam Dumps
NEW QUESTION 17
A network architect plans to propose a virtual Mobility Master (VMM) tor a new solution. The solution will support up to 4.800 wireless client devices and include:
* two Virtual Mobility controllers (VMCs) in a cluster
* 180 APs
Which licenses should the architect propose?
- A. 1 MM-VA-500; 2 MC-VA-250; 540 Enterprise licenses
- B. 1 MM-VA-1K; 2 MC-VA-25Q; one Enterprise license
- C. 1 MM-VA-IK:I MC-VA-250; 180 Enterprise licenses
- D. 1 MM-VA-500; 1 MC-VA-250; 180 Enterprise licenses
Answer: C
NEW QUESTION 18
A customer has multiple, very small branch sites that require just one or two APs each. The office has a local Internet connection, but all of the traffic is destined To the corporate data center, which has an Aruba wireless solution.
Which branch office solution best meets the customer needs?
- A. RAPs and no branch office controllers
- B. RAPs and 7005 branch office controllers with an. SD-WAN license
- C. CAPS and 7005 branch office controllers
- D. IAPs and 7005 branch office controllers with an 3D-WAN license
Answer: C
NEW QUESTION 19
Refer to the exhibit.
A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?
- A. The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.
- B. The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.
- C. The 8320 switches are required to eliminate the aggregation layer as the customer desires.
- D. The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.
Answer: A
NEW QUESTION 20
Refer to the exhibit.
A hospital needs an upgrade to 802.1tax for its wireless network. The wireless network supports:
* wireless medical devices
* medical staff voice communicators
* laptops in nurse stations
* medical staff tablets
* visitor and patient personal devices.
All of these devices support both the 2 4GHz and 5GH2 band. Assuming about a max throughput on50 Mbps per AP; the hospital would like. The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital expects will need to suppod about 800 win to deploy APS in stairwells between floors.
How well does the plan meet the requirements?
- A. The current AP placement meets the customer requirements in terms of coverage and capacity.
- B. The current AP placement fails to provide adequate signal for the voice communicators in several areas
- C. The current AP placement fails to account for the lead-lined wails that are common in patient and exam rooms.
- D. The current AP placement meets coverage requirements, but does not meet capacity requirements.
Answer: C
NEW QUESTION 21
An indoor basKetbaiI stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of GO feet (18 m).
* There is a catwalk around the perimeter of the basketball court, between the court and the seating areas.
* This catwalk is 40 feet (12 m) from the floor.
* There are two scoreboards at either end of the stadium.
* The construction of the stadium is concrete and sleet.
The customer does not want an under-seat, picoceli deployment.
Which AP model is appropriate to provide coverage in the main stadium bawl?
- A. AP-575
- B. AP-555
- C. AP-505
- D. AP-577
Answer: D
NEW QUESTION 22
A hospital wireless network must support many different types of users and devices, including:
* Visitors who access the Internet
* Admin staff, who run applications such as scheduling
* Medical staff, who look up patient info on their tablets
* Patient monitoring devices, which must not lose any traffic
* Communicator badges, which support real-time voice to allow nurses and doctors to communicate The hospital needs to ensure that the most vital and time-sensitive traffic is prioritized and that visitors do not interfere with hospital applications. The MC should mark traffic that passes through it for an appropriate priority.
Which plan meets the needs? (The plans describe firewall roles and rules but do not need to use correct syntax. Note that security roles are also not included.)
- A. Medical staff = Highest. Patient monitoring = Highest. Admin staff - High. Communicator = Normal. Visitors = Low.
- B. Patient monitoring = Highest. Medical staff = Highest. communicators = High. Admin staff = High. Visitors = Normal.
- C. Communicator = Highest. Patient monitoring = Highest. Medical staff = High. Admin staff = Normal: Visitors = Low.
- D. Medical staff = Highest. Communicator = High. Patient monitoring = High. Admin = High. Visitors = Normal
Answer: A
NEW QUESTION 23
A customer has an existing; Aruba wireless solution to provide wireless access for employees. The solution Includes Aps, mobility controllers (MCs) at the network core, and a Mobility Master (MM} A customer would like to set up a separatelymanaged guest network and have the traffic go directly to the DMZ.
What should the architect suggest as the simplest solution that meets the requirements?
- A. Double the number of APs and controllers.
- B. Have a dedicated mobility controller in the DMZ managed by the same MM
- C. Add APs in a dedicated AP group to support only the guest network SSID.
- D. Use MulitZone, and put a mobility controller in Itie DMZ.
Answer: D
NEW QUESTION 24
A customer has an Aruba solution with APs, MCs, and an MM The customer also uses AirWave and ClearPass. The customer wants to add Aruba CX Switches, which use per-user tunneled node, to the solution.
How should the Aruba CX Switches integrate with the existing solution in order to determine when to tunnel device traffic to MCs?
- A. They should be manually added as MDs in MM.
- B. They should be directed to MCs by a DHCP or DNS server.
- C. They should implement authentication to ClearPass.
- D. They should be managed by AirWave with SNMPv3.
Answer: B
NEW QUESTION 25
Refer to the exhibit.
The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.
The customer has indicated that it has these VLANS for user devices.
* VLAN 11 for Floori employee wired devices
* VLAN 12 for Floor 2 employee wired devices
* VLAN 13 tor Floor 3 employee wired devices
* VLAN 14 for Floor 4 employee wired devices
* VLAN 15 for Floor 5 employee wired devices
* VLAN 101 for all employee wireless devices
* VLAN 102 for all guest wireless devices
In which locations should the architect plan the VLANs?
- A. VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)
- B. VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)
- C. VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.
- D. VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC
Answer: D
NEW QUESTION 26
in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?
- A. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.
- B. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.
- C. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.
- D. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails
Answer: C
NEW QUESTION 27
Refer to the exhibit.
A customer has the wined infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services They will now add a new wireless solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?
- A. The wired VLANS should be combined into a single VLAN and n6 subnet
- B. The core and aggregation switches should disable Virtual Switching Framework (VSF).
- C. The MCs should be moved to the aggregation layer, and more MCs added
- D. The core switches should be replaced with switches that have larger ARP tables.
Answer: B
NEW QUESTION 28
Which scenario Indicates the need for a wireless mesh?
- A. A hospital needs to provide high availability for wireless services in certain areas which support very critical wireless medical devices. Devices must always be in range of at least two APs.
- B. A nsstorical building has some wired areas and a few areas with no wired or wireless connectivity, walls and ceilings have asbestos. The company needs wireless access across the site.
- C. A company needs to provide seamless roaming and wireless access between two buildings. The buildings are about 60 feet (18 m) apart.
- D. A company has a small branch office with just one RAP. The company has noticed that performance is poor in some areas of the network and wants to add another AP.
Answer: C
NEW QUESTION 29
Refer to the exhibit.
A customer needs a wireless network upgrade and has these requirements.
- Support any applications used on a wired connection
- Support up to 2500 wireless clients
- Support seamless roaming from floor to floor and building to building
- Continue to function seamlessly if one controller fails
The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?
- A. Combine me /25 subnets for wireless and wired users into a /16 subnet.
- B. Install additional Mobility Controller.
- C. Combine the /25 subnets for wireless users into a /20 subnet
- D. Place each controller in a different VLAN and subnet.
Answer: B
NEW QUESTION 30
A mall requires a wireless network upgrade to 802 -Max The company that owns the mall wants to provide the APs for the entire mall. However, several of the larger national chain retailers with spaces in the mall want to offer wireless services with their own SSIDs.
These individual retailers also have their own wireless guest services and wireless client devices They have their own corporate infrastructure and want to handle all of this wireless traffic on their own, including terminating the traffic on their own controllers. The mall requires redundancy for its services, out the retailers do not.
Which plan for mobility controllers (MCs) and mobility master (MW) meets the needs of this scenario?
- A. two MCs for the mail company controlled by a pair of MMS; one standalone MC for each retailer with its own SSIDS
- B. a pair of MMs for the mall company, but not MCs: MMs control one MC for each retailer with its own SSIDs
- C. two MCs for the mall company and for all of the retailers, both controlled by the same pair of MMs
- D. two MCs for the mall company and one MC for each retailer with its own SSIDs, all controlled by the same pair of MMs
Answer: B
NEW QUESTION 31
A retail customer is doing a wired and a wireless refresh with Arut>a CX switches and S02.11ax APs. Currently, trey nave wireless Point of Sales (PoS) systems and would like to assure that the proposed deployment solution will comply with the Payment Card Industry (PCI) Data Security Standard (DSS) requirements.
The architect have proposed the following deployment solutions regarding PCI DSS requirements'
-IDS/IPS
-Aruba APs in hybrid mode as well as in dedicated AMs mode
-Strong authentication and encryption for wireless
-Built-in firewall and role-based access controls to segment WLAN
Which other requirements must you include in the existing deployment solution? (Select two.)
- A. Aruba Central or Aruba AirWave to generate a scheduled compliance reporting.
- B. Suggest MACSet between the Aruba CX switches that encrypt all traffic over the link.
- C. Select the FIPS/TAA-compliant version for the Access Points.
- D. Role-based access controls for wired users using ClearPass. Optionally ; tunneled-node to MCs.
- E. Switch high-availability solution VSF and VSX also can encrypt all traffic on their switch links.
Answer: A,D
NEW QUESTION 32
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?
- A. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
- B. The Aruba CX 630DM support up to 75W PoE+ per port
- C. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
- D. The customer wants to utilize LACP on AP515 in VSF switch configuration.
Answer: B
NEW QUESTION 33
A customer has an Aruba wireless network. which includes two MC 7205s and an MM at the network core. The company now wants to accommodate 50 mobile trainers These trainers travel around the world and run training events. The trainers often need to access materials in the company data center, but cannot reach materials when they are on the road.
The company wants to give the mobile workforce a secure way to reach the materials they need no matter where they are.
including in public spaces like the hotels where they often leach. The customer also requires that the solution be as cost effective as possible while meeting the requirements.
Which plan meets the needs of the mobile Trainers?
- A. Add 50 VIA licenses to the MM, and deploy two 7005 MCs in the DMZ.
- B. Add 50 RAPs; add 50 Enterprise licenses and 50 VIA licenses to the MM
- C. Add so PEFV licenses to the MM. and add an additional 7205 MC to the core.
- D. Add 50 RAPs: add 50 Enterprise licenses to the MM, and add two 7005 MCs in the DMZ.
Answer: B
NEW QUESTION 34
A customer needs an AP for an indoor lecture nail mat is about 82 feet (25 m) by 32 feet (25 m) and has 300 seats. The ceiling height is 15 feet The expected take rate is 100 percent.
The network needs to support the student laptops, which all support S02.Hac and some support 802.11ax standard.
The customer would like to obtain as many usable cells as possible with as few APs as possible.
Which of these APs meets the requirements?
- A. AP-345
- B. AP-S15
- C. AP-535
- D. AP-335
Answer: C
NEW QUESTION 35
What is one benefit that Airwave provides to customers in the 8.x OS network?
- A. a central UI from which to manage all of the Mobility Controllers (MCs)
- B. ability to monitor the status and operation of the complete network over time
- C. profiling of wired and wireless client behavior and detection when the behavior varies from the baseline
- D. in-depth analytics oT mobile device presence and APIs to make this data available to other applications
Answer: C
NEW QUESTION 36
Refer to the exhibit.
A customer needs a new branch office solution that:
provides 802.11ac wireless access to local resources and the local Internet connection connects wired and wireless users to resources at the main office in a secure manner The office has 200 users, who will the up to two wireless devices at the same time. The architect has determined that the office requires 10-13 AP-
515s. The customer wants to support a total bandwidth from an or me APS or about 2 cops.
The entire site is currently wired for CAT5e from a single wiring closet, which contains two access switches, a core switch, and the Internet cable modem, which has 10/10O/1OQO Mbps BASE-T ports. The wired networK will handle abouti Gbps of traffic. The switches do not support P0E/P0E+.
About 75 percent of all traffic is destined to the main office
The architect has looked up these specs for 7000 series controllers.
Which MC will meet the needs in the most cost-effective manner?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 37
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
The APs will he installed on the ceilings, which are about S feel (2.4 m) high.
What is one feature on the APs that can help the customer comply with PCI DSS?
- A. Smart Rate ports
- B. Anomaly-based threat detection
- C. Physical security with Kensington Security Slots
- D. User and Entity Behavior Analytics (UEBA)
Answer: A
NEW QUESTION 38
Refer to the exhibit.
This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?
- A. about 13-16
- B. about 6-8
- C. about 23-32
- D. about 6-4
Answer: B
NEW QUESTION 39
Refer to the exhibit.
A museum wants to add full S02.11ax wireless coverage across the building, which is about 210 feet (64 m) by 330 feet (100 m). The museum has 15-foot (4.6 m) ceilings and stone interior walls. The network needs to support up to 600 wireless guest devices The exhibit also shows a preliminary plan tor AP locations, me museum has eight Ethernet drops in the lobby and girt stop, but has otherwise not been wired.
What is one recommendation that the architect should make to ensure a successful deployment?
- A. Add a wiring closet closer to the north side.
- B. Add about 10 APs to achieve adequate density
- C. Use at least CATS cable to connect to the APs.
- D. Use directional antennas to avoid lost signal.
Answer: A
NEW QUESTION 40
......
Prepare Top HP HPE6-A80 Exam Audio Study Guide Practice Questions Edition: https://www.actualtorrent.com/HPE6-A80-questions-answers.html