PDF Download Free of JN0-1362 Valid Practice Test Questions
JN0-1362 Test Engine files, JN0-1362 Dumps PDF
Juniper JN0-1362 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 23
Which RFC standards-based feature allows for customer-specific configuration parameters to be passed between RADIUS and a BRAS?
- A. DHCPv6 options
- B. vendor-specific attributes
- C. DHCP options
- D. LSA
Answer: B
NEW QUESTION 24
A new customer asks that you extend their LAN across your WAN The customer wants to retain administrative control over all routing in their network.
Which two architectures would meet this requirement? (Choose two.)
- A. public Internet
- B. VPLS
- C. Layer 3 VPN
- D. Layer 2 VPN
Answer: B,D
NEW QUESTION 25
Your customer connects to their service providers using fiber-based Ethernet connections in a shared collocation room. The customer has expressed concerns about wire tapping and man-in-the-middle attacks, and has asked for your design recommendation to minimize such attacks.
Which service addresses the customer's concern?
- A. 802 3ad
- B. 802 1x
- C. MACsec
- D. BGPFIowSpec
Answer: C
NEW QUESTION 26
You work for a service provider and are designing an L3VPN with Internet access solution for a customer using Provider Independent (PI) IPv6 space.
Which networking designs will work for this customer?
- A. Use NAT64 to convert PI space to IPv4 Internet addresses set up 6PE on your PE routers to transport IPv4 traffic natively.
- B. Use NAT66 to convert PI space to your public IPv6 space set up 6PE on your PE routers to transport IPv6 traffic natively.
- C. Use NAT64 to convert PI space to your public IPv6 space set up 6VPE routing instances on your PE routers for the customer
- D. Use NAT64 to convert PI space to IPv4 internet addresses, set up 6VPE routing instances on your PE routers for the customer.
Answer: D
NEW QUESTION 27
What are two risks when using a source-based RTBH solution? (Choose TWO)
- A. The target of the attack may not support RTBH.
- B. The target of an attack would be blocked resulting in a target being offline.
- C. The attacker's address could be unknown.
- D. The attacker address could be a CGNAT address resulting in a larger service outage for users.
Answer: A,D
NEW QUESTION 28
Your WAN links are on a VPLS service from a single service provider. You must verify device configuration power and status in the event of a service outage.
Which two actions provide out-of-band management to your edge routers? (Choose two)
- A. Connect each serial management port to a console server with a cellular Internet connection
- B. Place management traffic on a separate VLAN on the VPLS service
- C. Connect each Ethernet management interface to a dedicated switch with traffic routed on its own subnet on the VPLS service
- D. Connect each Ethernet management interface to a dedicated switch with its own WAN connection.
Answer: A,D
Explanation:
https://www.wti.com/t-remote-console-and-power-management-for-juniper-switches-and-routers.aspx
NEW QUESTION 29
You work for a service provider who wants to provide a service to your customers consisting of VoIP, live TV, video on demand (VoD), and data services You want to use a hybnd VLAN model for this service Which VLAN assignments would be used for this deployment?
- A. Video services will reside in a shared video VLAN. and the customer willHjttlttjftvo data VLANs assigned, one for voice and one for data.
- B. Live TV will be multicast to all customers, video on demand and data will share a customer specific VLAN, VoIP will use a shared VLAN utilizing private VLANs to talk to a telephony server.
- C. Live TV will be multicast to all customers, video on demand, voice, and data will share a customer specific VLAN.
- D. Live TV and VoD will be in the same shared VLAN with Live TV on a multicast stream and VoD unicast, voice and data will reside in a customer specific VLAN.
Answer: B
NEW QUESTION 30
Your team manages a WAN consisting of multiple customer MPLS tunnels. You are asked to design an SDN WAN solution capable of signaling LSPs to avoid nodes or links before they are removed from the network for service.
Which Juniper Network's SDN WAN solution satisfies these requirements?
- A. NorthStar Controller Bandwidth Calendaring
- B. NorthStar Planner Failure Simulation
- C. NorthStar Planner Path Design
- D. NorthStar Controller Maintenance Mode
Answer: C
NEW QUESTION 31
You are asked to provide a design proposal for a service provider's core network. The network consists of both IPv4 and IPv6 addresses and must scale up to 50 core routing devices.
In this scenario, which statement is correct regarding the IGP design?
- A. You can use OSPFv2 for IPv4 and OSPFv3 for IPv6 at the same time.
- B. You must use IS-4S to support both address families.
- C. You must use OSPFv3 to support both address families.
- D. You can use OSPFv2 to support both address families.
Answer: B
NEW QUESTION 32
Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service.
Which solution would satisfy the customer's requirement?
- A. a routed service
- B. an EVPN service provided over IP
- C. an IPsec VPN service between CE routers
- D. an L3VPN service
Answer: D
NEW QUESTION 33
You work for a corporation deploying new data centers using EVPN/VXLAN You are considering using EVPN for the data center interconnects. The hardware and software being deployed in the data centers support EVPN Type 5 routes.
In this scenario, which additional DCI benefit do Type 5 routes provide?
- A. Type 5 routes provide Layer 2 connectivity across multiple data centers, if VXLAN encapsulation is being used.
- B. Type 5 routes provide Layer 2 connectivity across multiple data centers, if MPLS encapsulation is being used.
- C. Type 5 routes support Layer 2 and Layer 3 connectivity between data center eliminating the need to advertise Layer 3 VPN and Layer 2 VPN routes.
- D. Type 5 routes support Layer 3 connectivity across multiple data centers, eliminating the need to advertise Layer 3 VPN routes.
Answer: C
NEW QUESTION 34
You want to implement Source Packet Routing in Networking (SPRING) in your network core using MPLS as the data plane for traffic engineering purposes.
In this scenario what are two protocols that would be used to distribute the segment IDs? (Choose two )
- A. IS-IS
- B. RSVP
- C. LDP
- D. OSPF
Answer: A,D
NEW QUESTION 35
You are working on a multi-Data Center interconnect (DCI) solution. Your WAN is based upon a multipoint MPLS Layer 3 VPN. This design must provide Layer 2 connectivity between the data centers across your WAN.
Which technology would satisfy the requirement?
- A. VCF
- B. RTG
- C. VRRP
- D. EVPN
Answer: D
NEW QUESTION 36
Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)
- A. MPLS labels enable several logically separated networks to share a common network infrastructure.
- B. The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.
- C. A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.
- D. MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.
Answer: A,D
NEW QUESTION 37
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
- A. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
- B. Advertise the prefix to SP-B with an origin of unknown.
- C. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
- D. Advertise the prefix to SP-A with an origin of unknown.
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html
NEW QUESTION 38
Exhibit.
You work for service provider B that wants to implement a hot potato routing policy on the network so that router C uses link C-A to reach service provider A's advertised routes and router D uses link D-B to reach Service Provider A's advertised routes Currently traffic from router C is traversing the core to exit the network on router B.
Referring to the exhibit, what are two design actions that would satisfy the requirements? (Choose two.)
- A. Implement BGP-LS
- B. Configure new IBGP neighbors between routers C and A and routers D and B
- C. Implement BGP-ORR
- D. Configure the route reflector to send multiple copies of a route learned from different IBGP peers to its clients.
Answer: B,D
NEW QUESTION 39
The operations team reports that the network is now so large that it has become a challenge to manually create and maintain RSVP LSPs. You want to provide the team with the capability to create LSPs using a graphical interface.
Which system should you use in this scenario?
- A. Paragon Pathfinder
- B. Junos Space
- C. OpenFlow
- D. CSO
Answer: B
NEW QUESTION 40
You are designing a new service provider network and need to select a label distribution mechanism that guides certain types of traffic along specific paths within the network.
Which two label distribution mechanisms would satisfy the requirements? (Choose two.)
- A. LDP
- B. BGP-LU
- C. segment routing
- D. RSVP
Answer: A,D
NEW QUESTION 41
Exhibit.
Within ISP E, R1 is load-balancing traffic destined to ISP D over the R1-R2-R5 and R1-R4-R5 paths. At some point, a link degradation event occurs in the network as shown in the exhibit. You want R1 to rapidly learn of the path failure.
- A. Enable Bidirectional Forwarding Detection between R4 and R5.
- B. Adjust the OSPF hello timer to a subsecond value between R4 and R5.
- C. Enable Bidirectional Forwarding Detection between R1 and R4.
- D. Adjust the OSPF hello timer to a subsecond value between R1 and R4.
Answer: A
NEW QUESTION 42
You are designing a full mesh of connections between multiple enterprise In this scenario, which two statements are correct? (Choose two.)
- A. IPsec tunnels can be used to secure traffic between sites.
- B. Security and Internet control is applied at a central location
- C. All sites are able to communicate directly with each other
- D. It is easier for administrators to enforce application-aware services with a single point of management.
Answer: B,C
NEW QUESTION 43
As a service provider network architect, you are working with a potential customer who wants to replace their WAN, consisting of two data centers, one HQ, and 76 branch offices Due to application latency requirements between branch offices, the customer insists that all traffic must take the most optimal path through the service provider network. The customer intends to encrypt all traffic between customer routers at each location.
Which WAN technology would you propose in this scenario?
- A. point-to-point Layer 2 VPNs
- B. H-VPLS
- C. Layer 3 VPN
- D. Internet as WAN
Answer: D
NEW QUESTION 44
......
Pass Your JNCDS-SP JN0-1362 Exam on Dec 05, 2021 with 130 Questions: https://www.actualtorrent.com/JN0-1362-questions-answers.html