[Nov-2021] Free HPE6-A71 Exam Questions HPE6-A71 Actual Free Exam Questions
Verified HPE6-A71 dumps and 173 unique questions
HP HPE6-A71 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
| Topic 16 |
|
| Topic 17 |
|
| Topic 18 |
|
NEW QUESTION 57
An administrator creates a mesh cluster profile and has defined the RF band and cluster name. What else must the administrator configure in the profile?
- A. CPSec
- B. IPSec
- C. Mesh portal IP address(es)
- D. WPA hexkey or passphrase
Answer: D
NEW QUESTION 58
An administrator wants to implement the MultiZone feature in a company's network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controllerat the company's DMZ.
Given this scenario, what is true about the implementation of Multizone?
- A. The primary and data zones must be in the same L2 subnet.
- B. A MultiZone AP can initially connect to any zone to obtain its configuration.
- C. Only the primary zones can reboot, upgrade, or provision MultiZone APs.
- D. A management session is established only with the primary zone, but data sessions are established to all zones.
Answer: B
NEW QUESTION 59
Refer to theexhibit.
An administrator configures policies to allow RAPs to connect to the corporate office and remote users to access resources. Which function does the VPN address pool serve in this situation?
- A. Assigns IP addresses for remote users
- B. Assigns a public IP address that the RAP should use on its internet port
- C. Assigns a DHCP address pool for the RAP
- D. Assigns an inner IP address to the RAP used within the VPN
Answer: D
NEW QUESTION 60
A group of users on the same floor of a campus residence experience connectivity problems continuously throughout the morning. The administrator suspects that it is a L1 problem with physical interference.
What can the administrator do to find the cause of this problem?
- A. Access a controller's spectrum analysis data from AirWave's dashboards, under Home.
- B. Access RAPIDS data from AirWave's dashboards, under Home.
- C. Access RAPIDS data from AirWave's RAPIDS section.
- D. Access a controller's spectrum analysis data directly from AirWave with Quick Links.
Answer: A
NEW QUESTION 61
Refer to the exhibit.
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?
- A. AP load balancing is enabled.
- B. This is an L2-connected cluster.
- C. This is an L3-connected cluster.
- D. User load balancingis enabled.
Answer: A
NEW QUESTION 62
An administrator has a cluster ofAruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.
Before rebooting, which command should the administrator use to move the APs?
- A. active-ap-rebalance
- B. apmove
- C. active-ap-lb
- D. lc-cluster move ap
Answer: D
NEW QUESTION 63
An administrator wants to implement the MultiZone feature in a company's network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controller at the company's DMZ.
Given this scenario, what is true about the implementation of MultiZone?
- A. A MultiZone AP can initially connect to any zone to obtain its configuration.
- B. The primary and data zones must be in the same L2 subnet.
- C. A management session is established only with the primary zone, but data sessions are established to all zones.
- D. Only the primary zone can reboot, upgrade, or provision MultiZone APs.
Answer: D
NEW QUESTION 64
What must an administrator configure in order for the ClearPass server to execute a RADIUS Change of Authorization (CoA) to Aruba Mobility Controllers (MCs) in a cluster?
- A. VRRP IP on each clustermember
- B. Primary and backup LMS IP addresses
- C. Active and Standby AAC with clustering
- D. IPSec High Availability (HA) between two cluster members
Answer: D
NEW QUESTION 65
Refer to the exhibit.
An administrator wants to verify the operation of MultiZone in a network. The administrator uses the command show ap debug multizone to generate the output shown in the exhibit.
Based on the output, which statement is true?
- A. The MultiZone APs are in a cluster.
- B. Zone 1 is the primary zone, and zone 0 is the data zone.
- C. The maximum VAPs in the MultiZone is 15.
- D. The primary zone has limited the data zoneto one WLAN.
Answer: D
NEW QUESTION 66
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS controller configured for per-user tunneled node.
- B. This is an ArubaOS controller configured for per-user tunneled node.
- C. This is an ArubaOS-Switch configured for per-port tunneled node.
- D. This is an ArubaOS-Switch configured for per-user tunneled node.
Answer: C
NEW QUESTION 67
An administrator configures an ArubaOS switch for per-user tunneled node. Which protocol does the switch use to communicate with the Aruba Mobility Controller (MC)?
- A. PAPI
- B. IPSec
- C. SSL
- D. GRE
Answer: D
NEW QUESTION 68
Refer to the exhibit.
An AP is connected to a cluster of controllers. An AAA server provides all authentication and authorization functions for wireless users. A wireless user connects to an AP, and Active User Anchor Controller (A-UAC) and Standby UAC (S-UAC) tunnels are built from the AP to the respective controllers in the cluster.
Why would an administrator create four VRRP groups with four Virtual IP (VIP) addresses in the cluster?
- A. to provide a VRRP group for election of the cluster leader
- B. to allow the AP to establish redundant AP Anchor Controller (AAC) connections to the cluster
- C. to allow the AAA Server to enforce RADIUS CoA in case the A-UAC experiences an outage
- D. to allow High Availability (HA) Fast Failover to function in case a controller experiences an outage
Answer: C
NEW QUESTION 69
An administrator inherits an Aruba Mobility Controller (MC) that has an unknown username and password.
Which credentials should the administrator enter to resetthe administrative access?
- A. Username: backdoor; Password: @ruba
- B. Username: admin; Password: admin
- C. Username: Aruba; Password: Reset!
- D. Username: password; Password: forgetme!
Answer: D
NEW QUESTION 70
Where would an administrator define the split-tunneling mode for a RAP located at a branch office?
- A. the Firewall policy on the RAP
- B. the AAA policy on the controller
- C. the Firewall policy on the controller
- D. the VAP profile on the controller
Answer: D
Explanation:
Explanation
References:
the WLAN was created to use the tunnel-forwarding mode. Toconfigure the WLAN to use split-tunnel mode, you must edit the WLAN profile.
NEW QUESTION 71
Refer to the exhibit.
Which controller shown in the exhibit is elected as the cluster leader?
- A. Controller D
- B. Controller B
- C. Controller A
- D. Controller C
Answer: B
NEW QUESTION 72
An administrator wants to use AirWave to manually add devices on the network. Where should the administrator perform this action?
- A. inGroups
- B. in AMP Setup
- C. in Device Setup
- D. in APs/Devices
Answer: C
NEW QUESTION 73
Refer to the exhibit.
The branch office RAP shown in the exhibit provides secure wireless employee access. Because of security concerns, the company's security policy does not allow wireless guest access. Some customers that visit the Branch office need Internet access. A RAP's Ethernet Port 3 is used for wired guest access and Port2 is used for wired employee access. When employees connect to Port2, they are authenticated successfully and split-tunnel policy allows them access to both corporate and Internet resources from the Branch office. Guest users, however, cannot access Internet resources on Port 3.
How can the administrator provide guest users Internet access?
- A. Implement ClientMatch to handle the employee and guest user traffic correctly.
- B. Configure a bridge role for the wired RAP port.
- C. Create a guest VAP that allows wired RAP port access.
- D. Implement the MultiZone feature on the RAP.
Answer: B
Explanation:
Explanation
https://www.arubanetworks.com/techdocs/ArubaOS%206_3_1_Web_Help/Content/ArubaFrameStyles/Remote_
NEW QUESTION 74
Refer to the exhibit.
An AP is connected to a cluster of controllers. An AAA server provides all authentication and authorization functions for wireless users. A wireless user connects to an AP, and Active User Anchor Controller (A-UAC) and Standby UAC (S-UAC) tunnels are built from the AP to the respective controllers in the cluster.
Why would an administrator create four VRRP groups with four Virtual IP (VIP) addresses in the cluster?
- A. to provide a VRRP group for election of the cluster leader
- B. to allow the AP to establish redundant AP Anchor Controller (AAC) connections to the cluster
- C. to allow the AAA Server to enforce RADIUS CoA in case the A-UAC experiences an outage
- D. to allow High Availability (HA) Fast Failover to function in case a controller experiences an outage
Answer: C
NEW QUESTION 75
An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic.
But, when users connect with their wired desktops, they have full access to corporate resources.
What must the administrator do to restrict desktop usage based on the users' role assignment?
- A. Identify the RAP port as untrusted.
- B. Implement ACLs on the RAP port.
- C. Implement per-user tunnel node on the RAP.
- D. Apply a server-derived role privacy to the RAP port.
Answer: A
NEW QUESTION 76
An administrator purchases a RAP and has it shipped directly to a branch office. The branch office plugs in the RAP and the RAP contacts Aruba Activate. The RAP learns the Mobility Controller (MC) IP address and connects to it. However, the connection fails.
Upon verifying the MC IP address in Aruba Activate, what should the administrator do to allow the RAP connection to succeed?
- A. Define the RAP's IPSec pre-shared key in Activate.
- B. Whitelist the RAP's certificate on the MC.
- C. Whitelist the RAP's IP address on the MC.
- D. Configure a VPN address pool in Activate.
Answer: B
NEW QUESTION 77
......
Latest 100% Passing Guarantee - Brilliant HPE6-A71 Exam Questions PDF: https://www.actualtorrent.com/HPE6-A71-questions-answers.html