Latest Success Metrics For Actual S1000-007 Exam 2024 Realistic Dumps
Updated S1000-007 Dumps Questions For IBM Exam
NEW QUESTION # 21
An administrator checks the IBM Fix Level Recommendation Tool (FLRT) for their system to see if they need to update IBM firmware or software.
The tool asks for their current system firmware level. How can the administrator confirm what it is?
- A. run lsattr -1 firmware0
- B. run lsattr -El sys0 Igrep mcode
- C. run lsmcode -A
- D. run lscfg -vl sys0
Answer: A
NEW QUESTION # 22
Which statement is true regarding the snap command?
- A. The data must be stored in /tmp.
- B. By default, it will check there is enough space where the data is to be stored.
- C. It collects performance related data.
- D. All options are enabled by default.
Answer: B
Explanation:
"The command to limit root user access to only members of the group called system is chadmin group=system root. This command will set the primary group of the root user to the system group, thereby limiting root user access to only members of that group. This command can be used to set any user's primary group, not just root." The source of this information is the IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 23
An IT security department would like to limit root user access to only members of the group called system.
Which command will accomplish this?
- A. cruiser sugroups=system root
- B. chadmin group=system root
- C. chgroup admin=root system
- D. chadmin user=root system
Answer: C
NEW QUESTION # 24
How are console log messages recorded by AIX?
- A. errdemon
- B. alog
- C. syslog
- D. rsyslog
Answer: D
NEW QUESTION # 25
While a system administrator is checking the TCP/IP connectivity between two systems with the traceroute command, the administrator found Fragmentation required messages in the traceroute output.
What is the likely reason for these messages?
- A. Same MTU sizes between the source and target systems. The source and target systems are using Jumbo Frames. The LPARs are using the same Virtual Switch (vSwitch) Network.
- B. The TCP buffers in the router gateway are exhausted. The source and target system are having TCP/IP communication problems.
- C. The TCP buffers between the source and the target systems are exhausted. The source and target systems are using virtual ethernet adapters.
- D. Different MTU sizes between the source and target systems. The source system is using Jumbo Frames and the target is using the default MTU size.
Answer: D
NEW QUESTION # 26
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
- B. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
- C. On DBServer run the command /usr/sbin/f tpd.
- D. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- E. On DB_Server run command startsrc -t ftp.
Answer: B
NEW QUESTION # 27
What are three states a device can have when connected to an AIX system?
- A. Defined
- B. Running
- C. Available
- D. Blocked
- E. Suspended
- F. Stopped
Answer: A,C,F
Explanation:
Devices that are connected to the system can be in one of four states.
Devices that are connected to the system can be in one of the following states:
Item
Description
Undefined
The device is unknown to the system.
Defined
Specific information about the device is recorded in the customized database, but it is unavailable to the system.
Available
A defined device is coupled to the operating system, or the defined device is configured.
Stopped
The device is unavailable but remains known by its device driver.
If a tty device and a printer alternately use the same tty connector, both a tty device and a printer are defined on the same parent and port in the device configuration database. Only one of these devices can be configured at a time. When the tty connector is configured, the printer specific setup information is retained until it is configured again. The device is not removed; it is in the defined state. Maintaining a device in defined state retains customized information for a device that is not currently in use, either before it is first made available or while it is temporarily removed from the system.
If a device driver exists for a device, the device can be made available through the device driver.
https://www.ibm.com/docs/en/aix/7.2?topic=nodes-device-states
NEW QUESTION # 28
A customer runs smit on the AIX command line and receives the message below:
1800-005 SMIT requires a minimum of 24 line by 80 column output display.
What can be done to resolve the error?
- A. Make sure they are running as the root user.
- B. Change their DISPLAY environment variable.
- C. Resize their window.
- D. Set the TERM variable to smit.
Answer: C
Explanation:
The root user is not required to run SMIT, and the size of the window is the only factor that determines the minimum output display requirements. According to the IBM AIX v7 Administrator Specialty Study Guide (page 9-3), SMIT requires 24 lines and 80 columns for the output display for successful execution.
NEW QUESTION # 29
Which file starts the System Resource Controller?
- A. /etc/rc.local
- B. /etc/inittab
- C. /etc/rc.srcmstr
- D. /etc/rc.d/rc.2
Answer: B
NEW QUESTION # 30
A client is running multiple AIX, IBM i and Linux partitions on an IBM Power E980 system. Which command allows the administrator to check the number of processors, amount of memory, and list the devices on the AIX partition?
- A. prtconf
- B. lsdev
- C. syssnap -gc
- D. Iparstat -i
Answer: C
NEW QUESTION # 31
When a user logs in. the processing of their .profile is very slow. Which issue could contribute to the problem?
- A. A slow NFS mount for their home directory.
- B. The user's home file system is full.
- C. Network issues between the user location and the system.
- D. The PATH variable contains non-existent directories.
Answer: D
Explanation:
When a user logs in, the system will process their .profile file which contains the PATH variable. This variable specifies the list of directories that the system will search through to locate executable files. If the PATH variable contains non-existent directories, then it will take longer for the system to process the .profile file, resulting in a slower login experience. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
NEW QUESTION # 32
The administrator of an AIX NIM client system has accidentally removed the /etc/niminfo file. Which method is used to rebuild the /etc/niminfo file?
- A. Use the niminit command on the AIX client system to rebuild the /etc/niminfo file.
- B. Use the nimclient command to restore the /etc/niminfo file from the most recent mksysb backup image.
- C. Use the nimclient command on the AIX client system to rebuild the /etc/niminfo file.
- D. Use the rep command on the AIX client system to copy the /etc/niminfo file from the NIM master.
Answer: A
Explanation:
The niminit command can be used to rebuild the /etc/niminfo file on an AIX NIM client system if it has been accidentally deleted. This command will read the NIM database on the NIM master and generate the /etc/niminfo file accordingly. Reference: IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 33
How are console log messages recorded by AIX?
- A. errdemon
- B. alog
- C. syslog
- D. rsyslog
Answer: C
Explanation:
AIX provides the syslog service to record console log messages. The syslog service is used to control the logging of system messages and can be used to record and store the log messages in different formats. The syslog service is enabled through the use of the alog and errdemon commands. The alog command is used to view the log messages that are stored in the /var/adm/syslog/syslog.log file, while the errdemon command is used to control the logging of system messages. Reference: IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 34
Which command will show when a file was last accessed?
- A. fsdb file
- B. who -f file
- C. istat file
- D. Is -1 file
Answer: C
NEW QUESTION # 35
What are three states a device can have when connected to an AIX system?
- A. Defined
- B. Running
- C. Available
- D. Blocked
- E. Suspended
- F. Stopped
Answer: A,C,F
Explanation:
Explanation
Devices that are connected to the system can be in one of four states.
Devices that are connected to the system can be in one of the following states:
Item
Description
Undefined
The device is unknown to the system.
Defined
Specific information about the device is recorded in the customized database, but it is unavailable to the system.
Available
A defined device is coupled to the operating system, or the defined device is configured.
Stopped
The device is unavailable but remains known by its device driver.
If a tty device and a printer alternately use the same tty connector, both a tty device and a printer are defined on the same parent and port in the device configuration database. Only one of these devices can be configured at a time. When the tty connector is configured, the printer specific setup information is retained until it is configured again. The device is not removed; it is in the defined state. Maintaining adevice in defined state retains customized information for a device that is not currently in use, either before it is first made available or while it is temporarily removed from the system.
If a device driver exists for a device, the device can be made available through the device driver.
https://www.ibm.com/docs/en/aix/7.2?topic=nodes-device-states
NEW QUESTION # 36
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. oslevel -r -1 7200-04
- B. lppchk: -L -F "fileset level" I grep -v "7200-04"
- C. instfix -i I grep -v 7200-04
- D. lslpp -s -1 7200-04
Answer: C
NEW QUESTION # 37
Based on the output from the lparstat command, how many logical processors are configured in the partition?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 38
Which command will show when a file was last accessed?
- A. fsdb file
- B. who -f file
- C. istat file
- D. Is -1 file
Answer: C
Explanation:
The istat command displays information about the inode of a file, including the last access time. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "istat file", where 'file' is the path to the file you would like to check. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/istat.htm.
NEW QUESTION # 39
What command is used to monitor SAN I/O performance/throughput?
- A. iostat -DIRT 60 10
- B. mpstat -w 1
- C. ioo -L
- D. vmstat -i 1
Answer: A
NEW QUESTION # 40
Which two additional commands should an AIX V7.2 administrator run after mirroring the rootvg with mirrorvg command?
- A. bootlist
- B. bosboot
- C. varyonvg
- D. reboot
- E. synclvodro
Answer: A,B
Explanation:
The two additional commands that an AIX V7.2 administrator should run after mirroring the rootvg with the mirrorvg command are 'bosboot' and 'bootlist'. The bosboot command is used to update the boot image on all disks in the volume group, and the bootlist command is used to set the boot order for the system. These commands are available on IBM AIX v7 systems and are documented in the IBM AIX v7 Administrator Specialty Study Guide. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds3/bosboot.htm and https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds3/bootlist.htm.
NEW QUESTION # 41
An AIX administrator installed the fileset named useful_fileset. How can they determine which files are included in the fileset?
- A. lppchk -f useful fileset
- B. rpm -qf useful_fileset
- C. lslpp -f useful_fileset
- D. file -f useful__fileset
Answer: C
Explanation:
The "lslpp" command can be used to display information about filesets installed on an AIX system. To determine which files are included in the "useful_fileset" fileset, the administrator can run the following command:
lslpp -f useful_fileset
This command will display detailed information about the "useful_fileset" fileset, including a list of the files that are included in the fileset. This information can be useful for verifying the installation of the fileset and for troubleshooting problems that may be related to the fileset.
NEW QUESTION # 42
......
Full S1000-007 Practice Test and 48 Unique Questions, Get it Now!: https://www.actualtorrent.com/S1000-007-questions-answers.html
Best Value Available Preparation Guide for S1000-007 Exam: https://drive.google.com/open?id=1dDJDDmf64h7rqRSVDwUVp5K6klNKVhE_