Grab latest Fortinet NSE7_EFW-6.4 Dumps as PDF Updated on 2022
Newly Released NSE7_EFW-6.4 Dumps for NSE 7 Network Security Architect Certified
NEW QUESTION 74
View the exhibit, which contains the output of a debug command, and then answer the question below.
What statement is correct about this FortiGate?
- A. It is currently in system conserve mode because of high memory usage.
- B. It is currently in system conserve mode because of high CPU usage.
- C. It is currently in kernel conserve mode because of high memory usage.
- D. It is currently in FD conserve mode.
Answer: A
NEW QUESTION 75
Refer to the exhibit, which contains partial outputs from two routing debug commands.
Why is the port2 default route not in the second command's output?
- A. It has a higher distance than the default route using port1.
- B. It has a higher priority value than the default route using port1.
- C. It has a lowerpriority value than the default route using port1.
- D. It is disabled in the FortiGate configuration.
Answer: A
NEW QUESTION 76
Examine the output of the 'get router info ospf interface' command shown in the exhibit; then answer the question below.
Which statements are true regarding the above output? (Choose two.)
- A. The local FortiGate has been elected as the OSPF backup designated router.
- B. There are at least 5 OSPF routers connected to the port4 network.
- C. Two OSPF routers are down in the port4 network.
- D. Theport4 interface is connected to the OSPF backbone area.
Answer: B,D
Explanation:
Explanation
on BROADCAST network there are 4 neighbors, among which 1*DR +1*BDR. So our FG has 4 neighbors, but create adjacency only with 2 (with DR and BDR). 2 neighbors DRother (not down).
NEW QUESTION 77
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn't the tunnel come up?
- A. The remote gateway is using aggressive mode and the local gateway is configured to use man mode.
- B. The pre-shared keys do not match.
- C. The remote gateway's phase 2configuration does not match the local gateway's phase 2 configuration.
- D. The remote gateway's phase 1 configuration does not match the local gateway's phase 1 configuration.
Answer: D
NEW QUESTION 78
Examine the partial output fromtwo web filter debug commands; then answer the question below:
Based on the above outputs, which is the FortiGuard web filter category for the web site www.fgt99.com?
- A. Information technology.
- B. General organization.
- C. Business.
- D. Finance and banking
Answer: C
NEW QUESTION 79
Which two statements about an auxiliary session are true? (Choose two.)
- A. With the auxiliary session setting enabled, two sessions will be created in case of routing change.
- B. With the auxiliary session setting enabled, ECMP traffic is accelerated to the NP6 processor.
- C. With the auxiliary session disabled, only auxiliary sessions will be offloaded.
- D. With the auxiliary session setting disabled, for each traffic path, FortiGate will use the same auxiliary session.
Answer: C,D
NEW QUESTION 80
Viewthe exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. The web request was allowed by FortiGate.
- B. The requested URL belongs to category ID 52.
- C. This web request was inspected using the root web filter profile.
- D. FortiGate found the requested URL in its local cache.
Answer: B,D
NEW QUESTION 81
Examine thefollowing partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It hasa higher priority than the default route using port1.
- B. It has a higher distance than the default route using port1.
- C. It has a lower priority than the default route using port1.
- D. It is disabled in the FortiGate configuration.
Answer: B
Explanation:
Explanation
http://kb.fortinet.com/kb/viewContent.do?externalId=FD32103
NEW QUESTION 82
An administrator is running the following sniffer in a FortiGate:
diagnose sniffer packet any "host 10.0.2.10" 2
What information isincluded in the output of the sniffer? (Choose two.)
- A. IP headers.
- B. Port names.
- C. IP payload.
- D. Ethernet headers.
Answer: A,C
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=11186
NEW QUESTION 83
An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.
Why didn't the script make any changes to the managed device?
- A. CLI scripts will add objects only if they are referenced by policies.
- B. Incomplete commands are ignored in CLI scripts.
- C. Static routes can only be added using TCL scripts.
- D. Commands that start with the # sign are not executed.
Answer: D
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scripts/1000_Script%20samples/0200_CLI%20scripts+.htm#Error_Messages
A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.
NEW QUESTION 84
Refer to the exhibit, which contains the partial output of a diagnose command.
Based on the output, which two statements are correct? (Choose two.)
- A. Remote gateway IP is 10.200.4.1.
- B. Anti-replay is enabled.
- C. Quick mode selectors are disabled.
- D. DPD is disabled.
Answer: A,B
NEW QUESTION 85
Examine the output of the 'get router info ospf neighbor' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. The OSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the wan1 network.
- B. The interface ToRemote is OSPF network type point-to-point.
- C. The OSPF router with the ID 0.0.0.2 is the designated router for the ToRemote network.
- D. The local FortiGate is the backup designated router for the wan1 network.
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html
NEW QUESTION 86
Examine the partial output from two web filter debug commands; then answer the question below:
Based on the above outputs, which is the FortiGuard web filter category for the web site www.fgt99.com?
- A. Information technology.
- B. General organization.
- C. Business.
- D. Finance and banking
Answer: C
NEW QUESTION 87
Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0
gwy=10.200.1.254 dev=2(port1)
tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0
gwy=10.200.2.254 dev=3(port2)
tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254
gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2, [10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2
Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?
- A. Both portl and port2.
- B. port2.
- C. port3.
- D. port!
Answer: B
NEW QUESTION 88
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peer 10.200.3.1 has never been down since the BGP counters were cleared.
- B. BGP state of the peer 10.125.0.60 is Established.
- C. Local BGP peer has not received an OpenConfirm from 10.200.3.1.
- D. The local BGP peer has received a total of 3 BGP prefixes.
Answer: B,C
NEW QUESTION 89
......
The benefit of obtaining the Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certification
You must make sure you have the best qualifications and experience when working as an IT field engineer to allow you to perform your job position as efficiently as possible. And this implies that the advantages of having an NSE certification should be recognized by you. Having certified to support you with your work has so many amazing advantages. NSE certification will help you to:
- Leverage Fortinet's full range of network security products
- Demonstrate value to current and potential employers
- Be recognized in the industry of security professionals
Latest NSE7_EFW-6.4 Exam Dumps Fortinet Exam from Training: https://www.actualtorrent.com/NSE7_EFW-6.4-questions-answers.html