Get instant access to HPE6-A73 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader HPE6-A73 PDF dumps ( 102 Q&As)
NEW QUESTION 28
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and the AOS-CX switches can successfully authenticate users; however, the role information fails to download to the switches. What policy should be added to an intermediate firewall to allow the downloadable role function to succeed?
- A. Allow UDP 1811
- B. Allow TCP 22
- C. Allow UDP 8211
- D. Allow TCP 443
Answer: C
NEW QUESTION 29
What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?
- A. Supports only port-based tunneling
- B. Uses the same management protocol as Aruba APs
- C. Uses iPSec to protect the management and data traffic
- D. Uses IPSec to protect the management traffic
Answer: B
NEW QUESTION 30
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit.
How should the administrator purchase and/or install the NetEdit solution?
- A. Install as a hardware appliance
- B. Installed on a supported version of Debian Linux
- C. Installed on a supported version of RedHat Enterprise Linux
- D. Installed in a virtualized solution by using the Aruba-supplied OVA file
Answer: D
NEW QUESTION 31
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- D. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
Answer: B
NEW QUESTION 32
An administrator wants to implement dynamic segmentation policies. The network consists of AOS-CX and Aruba gateways.
Which type of forwarding should the administrator implement for users that already connect via wireless, but will also be connecting on Ethernet switch ports?
- A. Local switching
- B. Port-based tunneling (PBT)
- C. User-based tunneling (UBT)
- D. Switch-to-switch tunneling (SST)
Answer: C
NEW QUESTION 33
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 3
- B. Server 1 to Client 1
- C. Client 1 to Client 2
- D. Server 2 to Client 2
- E. Client 3 to Client 2
Answer: A,C
NEW QUESTION 34
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?
- A. AOS-CX 8325
- B. AOS-CX 6400
- C. AOS-CX 8400
- D. AOS-CX 6300
Answer: A
NEW QUESTION 35
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. LLDP
- B. ARP
- C. ICMP
- D. DHCP
Answer: C
NEW QUESTION 36
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined.A network engineer notices thefollowing command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Implement replay protection for AAA messages
- B. Speed up the AAA authentication process
- C. Define the account to implement downloadable user roles
- D. Define the account to implement change of authorization
Answer: B
NEW QUESTION 37
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. A connectivity issue exists between NAE and the AOS-CX switch
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. The administrator does not have the appropriate credentials to interact with NAE
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: A
NEW QUESTION 38
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- D. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
Answer: B
NEW QUESTION 39
Which statement is correct regarding ACLs and TCAM usage?
- A. Using object groups consumes the same resources as specific ACE entries
- B. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
- C. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches
- D. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
Answer: A
NEW QUESTION 40
The company has just upgraded their access layer switches with AOS-CX switches and implemented an AAA solution with ClearPass. The company has become concerned about what actually connects to the user ports on the access layer switch, Therefore, the company is implementing 802.1X authentication on the AOS-CX switches. An administrator has globally enabled 802.1X, and has enabled it on all the access ports connected to user devices, including VoIP phones, security cameras, and wireless Aruba IAPs. Wireless users are complaining that they successfully authenticate to the IAPs; however, they do not have access to network resources. Previously, this worked before 802.1X was implemented on the AOS-CX switches.
What should the company do to solve this problem?
- A. Implement local user roles and local forwarding on the AOS-CX switches.
- B. Implement device-based mode on the lAP-connected AOS-CX switch ports.
- C. Implement AAA RADIUS change of authorization on the AOS-CX switches.
- D. Implement downloadable user roles and user-based tunneling (UBT) on the AOS-CX switches.
Answer: D
NEW QUESTION 41
Examine the AOS-CX switch output:
Based on this output, what is correct?
- A. 802 1X authentication occurred and downloadable user rotes are deployed
- B. 802.1X authentication was successful, but MAC authentication is yet to start
- C. Only 802 1X authentication is configured on the port
- D. A local user role was deployed using a ClearPass solution
Answer: A
NEW QUESTION 42
A company uses NetEdit to manage a network of 700 AOS-CX switches and approximately 1,000 other SNMP-capable devices.
Which management solution should the company use to monitor all the devices, as well as see a topology picture of how all the devices are connected together?
- A. Aruba AirWave
- B. NetEdit
- C. Network Analysis Engine (NAE)
- D. Aruba Activate
Answer: B
NEW QUESTION 43
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit How should theadministrator purchase and/or install the NetEdit solution?
- A. Install as a hardware appliance
- B. Installed on a supported version of Debian Linux
- C. Installed on a supported version of RedHat Enterprise Linux
- D. Installed in a virtualized solution by usung the Aruba-supplied OVA file
Answer: D
NEW QUESTION 44
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. ARP
- B. LLDP
- C. DHCP
- D. ICMP
Answer: B
NEW QUESTION 45
Examine the attached diagram
Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?
- A. Server 2 cannot access the core layer.
- B. Server 1 and Server 2 can communicate with each other via the core layer.
- C. Server 1 can access the core layer via both uplinks.
- D. Server 2 can successfully access the core layer via the keepalive link.
Answer: C
NEW QUESTION 46
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers9
- A. It uses the shortest path first (SPF) algorithm derived from link state protocols.
- B. It uses IGMP and calculates a shortest path tree (SPT).
- C. It uses the Bellman-Ford algorithm derived from distance vector protocols
- D. It uses the unicast routing table and reverse path forwarding (RPF )
Answer: D
NEW QUESTION 47
......
Aug-2021 Latest ActualTorrent HPE6-A73 Exam Dumps with PDF and Exam Engine: https://www.actualtorrent.com/HPE6-A73-questions-answers.html
Premium Quality HP HPE6-A73 Online dumps: https://drive.google.com/open?id=1ecca9i95ZCKW1HTjA98vU8EWOgP-nvLa