Free Network Appliance NS0-194 Study Guides Exam Questions & Answer
NS0-194 Exam Dumps, NS0-194 Practice Test Questions
NEW QUESTION 93
For the cluster network of a two-node cluster running Data ONTAP 8.3.1, which statement is true?
- A. Only the traffic that is required for a volume move operation is sent across the cluster network.
- B. Client traffic will never be sent across the cluster network, since ALUA automatically chooses the best path.
- C. Client traffic will be sent across the cluster network, if the LIF and the volume are not on I same node.
- D. Only configuration data is sent across the cluster network.
Answer: A
NEW QUESTION 94
In which three scenarios is it possible to disable and remove the aggregate Snapshot copy? (Choose three.)
- A. You are protecting the aggregate using SyncMirror.
- B. You are protecting volumes using SnapMirror XDP.
- C. Your cluster is part of a MetroCluster configuration.
- D. You are protecting the aggregate with RAID-DP.
- E. You are protecting volumes using SnapMirror DP.
Answer: A,B,C
NEW QUESTION 95
You have a FAS2240 system using Data ONTAP 8.2.1 7-Mode with CIFS share "cifs" on an NTFS security-style volume.
Which two permissions would be modified using Windows Explorer? (Choose two.)
- A. file permissions
- B. cluster permissions
- C. folder permissions
- D. share permissions
Answer: B,D
NEW QUESTION 96
Which sequence of actions should you performafter replacing a memory DIMM?
- A. From the special boot menu, select option 6, Update flash, from the backup configuration.
- B. From the special boot menu, select option 4, Clean configuration, and initialize all disks.
- C. From the loader prompt, boot the backup image.
- D. From the loader prompt, start diagnostics mode.
Answer: D
NEW QUESTION 97
You have an aggregate with 10 TB of free space. You create a 5 TB volume with space-guarantee set to none and fractional reserve set to 0. Inside the volume, you create a 100 GB space-reserved LUN.
In this scenario, how much free space is left in the aggregate?
- A. 10 TB
- B. 9.9 TB
- C. 9.8 TB
- D. 5 TB
Answer: B
NEW QUESTION 98
Which NetApp Web-based tool would be used to analyze Perfstat output?
- A. LatX
- B. SmartSolve
- C. Field Portal
- D. My AutoSupport
Answer: C
NEW QUESTION 99
Click the Exhibit button at the right.
Your customer receives errors that a SyncMirror plex failed on their 4-node Fabric MetroCluster system. You verify that the other plexes are online and notice that no errors have occurred within the past year.
Referring to the exhibit, which troubleshooting step would you perform in this scenario?
- A. Review that all Inter-Switch Links (ISL) are online.
- B. Review the fabric switches, and ATTO bridges for errors.
- C. Review all SAS connections.
- D. Review if a site switchover has occurred.
Answer: B
NEW QUESTION 100
A large amount of data was deleted from a volume. After a few hours, the space was still not available to NFS clients accessing the volume.
What are two reasons that would account for this problem? (Choose two.)
- A. There is a thick-provisioned LUN in the volume.
- B. The client needs to re-scan the volume to detect the changes.
- C. The deleted data was all deduplicated data.
- D. The volume contains Snapshot copies that were taken before the data was deleted.
Answer: B,D
NEW QUESTION 101
In ONTAP 9.5, the event log show command queries and displays entries from which file?
- A. messages.log
- B. mgwd.log
- C. ems.log
- D. bcomd.log
Answer: C
NEW QUESTION 102
A customer mentions that their Windows users cannot access clustered Data ONTAP 8.3.1 CIFS shares. The users see "access denied" on the Windows side.
Host name resolution is working and properly resolves IP to host name and host name to IP and the customer can ping using host name and IP. In this scenario, which statement describes the problem?
- A. iSCSI has been enabled on the SVM.
- B. NTP is not enabled on the clustered Data ONTAP 8.3.1 cluster.
- C. The time on the controller is skewed by more than five minutes.
- D. There is no proper route to the storage virtual machine (SVM) running the CIFS server.
Answer: B
NEW QUESTION 103
Click the Exhibit button. Your customer explains that his disks are showing 100% utilization, but he does not see very much user I/O. While investigating, you collect statistics using the statit command over a 10-second time period as shown in the exhibit.
In this scenario, what is the problem?
- A. Disk 0a.16 is faulty, indicated by the high latency for ureads, and should be replaced.
- B. The network has too many multicast packets, which means the data is not being sent out over the network correctly.
- C. Disk 0a.16 is being used to reconstruct data from a failed disk in the aggregate.
- D. The end users are doing a lot of reads on the SATA disks using VAAI, which does not show up as user I/O.
Answer: D
NEW QUESTION 104
You want to monitor and generate reports on a customer's IT infrastructure, including virtual and cloud-based components, even though the customer has not purchased or installed any ONTAP software.
In this scenario, which NetApp tool would be used to accomplish this task?
- A. OnCommand System Manager
- B. OnCommand Workflow Automation
- C. OnCommand Unified Manager
- D. OnCommand Insight
Answer: D
NEW QUESTION 105
You are preparing to implement a storage virtual machine (SVM) in a SAN configuration. You need to eliminate single points of failure and enable the system to survive component failures.
According to NetApp, what is the recommended minimum number of paths per LUN connecting to each node being used by an SVM in a cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 106
When using NetApp Volume Encryption (NVE) which type of server is needed to keep encryption keys separate from encrypted data?
- A. TLS
- B. RADIUS
- C. KMIP
- D. TKIP
Answer: C
NEW QUESTION 107
You receive an AutoSupport notification because of the error shown below. "HA GROUP ERROR: DISK/SHELF COUNT MISMATCH ERROR."
In this scenario, which two steps would you take to solve the problem? (Choose two.)
- A. You should power cycle all the disk shelves to clear the error.
- B. You should perform a failover and a giveback to clear the error.
- C. You should review the /etc/messages log.
- D. You should examine the IOM modules for error lights and reseat.
Answer: A,C
NEW QUESTION 108
Exhibit:
You are attempting a storage giveback, but the process does not finish successfully. Referring to the exhibit.
What is the problem?
- A. There are active CIFS or NFSv4 connections.
- B. There are active cluster -02 was not ready for giveback.
- C. An aggregate has failed.
- D. The giveback failed on the node root aggregate.
Answer: A
NEW QUESTION 109
A user on an NFSv4 client is listing a directory and sees the file in an is -1 listing shown below:
"rwr------1 nobody nobody 10767 Mar 24 2016 party.txt"
The customer would like to know why the user and group shows as "nobody".
Which statement would explain why this is happening?
- A. There is no owner or group set on the file.
- B. There is an NFSv4 ID domain mismatch.
- C. The file resides on an NTFS style volume.
- D. The permissions does not allow for listing the owner.
Answer: D
NEW QUESTION 110
During the deployment of a new system, the administrator has a business requirement for the data volumes to have file blocking and auditing.
Which feature would enable these capabilities?
- A. log forwarding
- B. Vscan
- C. Fpolicy
- D. secd tracing
Answer: C
NEW QUESTION 111
You want to set up a FabricPool between an ONTAP cluster and Google Cloud Storage.
In this scenario, which two components are required to accomplish this task? (Choose two.)
- A. a Certificate Authority (CA) certificate
- B. a service account access key
- C. an Express Route
- D. intercluster LIFs
Answer: A,D
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/17239-tr4598pdf.pdf
NEW QUESTION 112
......
NetApp NS0-194 Exam Topics:
| Section | Objectives |
|---|---|
| Troubleshooting NetApp Hardware and Software | -Demonstrate knowledge of how to collect and analyze information -Demonstrate knowledge of how to troubleshoot data access problems -Demonstrate knowledge of how to analyze performance |
| NetApp Cloud Data Services | -Identify the components of cloud data services -Identify the components of a hybrid cloud solution |
| ONTAP OS | -Describe disk or aggregate concepts -Describe volume concepts -Describe ONTAP networking concepts -Describe how ONTAP interacts with external components -Identify ONTAP logging mechanisms -Describe supported ONTAP protocols |
| NetApp Hardware | -Identify the FRUs in a NetApp system -Demonstrate knowledge of the hardware replacement process -Describe storage hardware technology -Describe compute technology |
| Active IQ | -Describe how to use Active IQ |
| Data Protection | -Identify data protection concepts -Demonstrate knowledge of data protection operations |
Latest NS0-194 Actual Free Exam Questions Updated 190 Questions: https://www.actualtorrent.com/NS0-194-questions-answers.html
Attested NS0-194 Dumps PDF Resource [2021]: https://drive.google.com/open?id=1muQCf6P4EwXItmbSHu4IYgs0XWFrJ548