[Dec-2021] Use Real 4A0-113 Dumps - 100% Free 4A0-113 Exam Dumps
4A0-113 PDF Dumps Exam Questions – Valid 4A0-113 Dumps
NEW QUESTION 59
If a Router originates a type 1 router LSA with the E bit set what types of areas can it belong to? Select all that apply.
- A. Backbone Area
- B. Standard Area
- C. Stub Area
- D. Not So Stubby Area
Answer: A,B,D
NEW QUESTION 60
What is the source IP address in an OSPF update?
- A. 224.0.0.5
- B. 224.0.0.6
- C. The unicast IP address of the interface the update is sent on
- D. The system address of the router.
Answer: C
NEW QUESTION 61
What are the three databases maintained by a Link State Protocol?
- A. Neighbor, topology, forwarding
- B. There are only two databases: adjacency and topology
- C. Neighbor, adjacency, route table
- D. Topology, routing, forwarding
Answer: A
NEW QUESTION 62
A static route is created using the command "static-route 0.0.0.0/0 next-hop 3.3.3.1". What command could be used to test the static route on an Nokia 7750 SR?
- A. Ping 0.0.0.0
- B. Ping static 3.3.3.1
- C. Ping static 0.0.0.0/0
- D. Ping 3.3.3.1
Answer: D
NEW QUESTION 63
Click the exhibit button.
192.168.3.1 is a loopback interface on router R2 and is distributed to OSPF area 0, but the ping fails from router R3. Which of the following is a possible solution to the problem?
- A. Make a default route on router R2
- B. Make a static route on router R1 to 192.168.3.1
- C. Add the "summaries" option to the NSSA area configuration on router R1
- D. Add the "originate-default-route" option in the NSSA area configuration on router R3
Answer: C
NEW QUESTION 64
What causes an adjacency to change from down to two ways?
- A. When a link state update is received in response to a link state request.
- B. When a link state acknowledgement is received in response to a link state update.
- C. When a router receives a database description packet from a neighbor.
- D. When a router receives a Hello packet that contains its own router ID in the neighbor list from a neighbor.
Answer: D
NEW QUESTION 65
Which of the following commands can be used to display the number of SPF computations that have been performed on a router?
- A. show router ospf status
- B. show router ospf interface
- C. show router ospf area <area-id>
- D. show router ospf neighbor
Answer: C
NEW QUESTION 66
Click on the exhibit.
Router R2 learns the networks shown from IS-IS. Router R2 is configured to redistribute routes from IS-IS to OSPF as shown. Assume the OSPF and IS-IS adjacencies are operational.
How many OSPF Type 5 LSAs will router R1 receive from router R2?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: C
NEW QUESTION 67
Click the exhibit button.
What is the command to configure a static route on the Nokia 7750 SR router R1 to reach the network behind router R2?
- A. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
- B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
- C. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
- D. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
Answer: B
NEW QUESTION 68
Which of the LSA types stay within an OSPF area and are not exported outside of the area? (Choose all that apply)
- A. Router LSA
- B. Network LSA
- C. Summary Network LSA
- D. Summary Router LSA
Answer: A,B
NEW QUESTION 69
Choose the Distance Vector Protocols from the list below:
- A. OSPF
- B. RIPv2
- C. IS-IS
- D. RIPv1
Answer: B,D
NEW QUESTION 70
What type of OSPF router generates a type 2 LSA?
- A. Designated Router
- B. Autonomous System Boundary Router
- C. Area Border Router
- D. All routers within an OSPF area.
Answer: A
NEW QUESTION 71
Which LSA type is not found in point-to-point only OSPF networks?
- A. Type 5 External LSA
- B. Type 3 Summary LSA
- C. Type 2 Network LS A
- D. Type 1 Router LSA
Answer: C
NEW QUESTION 72
What are the default Hello and Dead timer intervals for OSPF on the Nokia 7750 SR?
- A. 5 and 20 seconds
- B. 10 and 30 seconds
- C. 10 and 40 seconds
- D. 5 and 15 seconds
Answer: C
NEW QUESTION 73
Click the exhibit button.
A static route is created on router R1 "using the "static-route 0.0.0.0/0 next-hop 10.3.3.2" command. What command can be used to test the static route on an Nokia 7750 SR?
- A. ping static 10.5.5.5
- B. ping 0.0.0.0
- C. ping 10.5.5.5
- D. ping static 0.0.0.0/0
Answer: C
NEW QUESTION 74
Click the exhibit button.
The OSPF adjacency between routers R3 and R1 is down. What is the problem?
- A. There is not enough information to tell.
- B. Area 1 of router R1 should not be configured as a stub.
- C. Router R1 has the incorrect authentication key type.
- D. Router R3 has the incorrect authentication key type.
Answer: C
NEW QUESTION 75
......
Nokia 4A0-113 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
Ultimate 4A0-113 Guide to Prepare Free Latest Nokia Practice Tests Dumps: https://www.actualtorrent.com/4A0-113-questions-answers.html
Get Top-Rated Nokia 4A0-113 Exam Dumps Now: https://drive.google.com/open?id=1tSv1qGHjKsPMfDYL5RqXO9u_uLc1sb3U