Authentic 300-615 Dumps With 100% Passing Rate Practice Tests Dumps
Cisco 300-615 Real Exam Questions Guaranteed Updated Dump from ActualTorrent
Preparation Options
No need to remind that the high-quality preparation resources are the guarantee of success in Cisco 300-615. Therefore, if you decide to take this exam, you need to study all the possible options for your comprehensive training. These are the two most helpful tools you can find:
- How I Passed Troubleshooting Cisco Data Center Infrastructure (300-615 DCIT) Exam by Rocismo Liolentz Publications
This guide contains essential study tips, learning methodologies, and concepts that are claimed to help you be up in arms on the exam day. The authors managed to answer the most frequently asked questions regarding the exam structure, organizational issues, motivation and time management in preparation, as well as what domains are worth paying special attention to. It is available to anyone on the Amazon website.
- Troubleshooting Cisco Data Center Infrastructure v7.0
This official training course is vital for the candidates who choose 300-615 DCIT as their concentration exam for the CCNP Data Center certification. It contains the topics that focus on the data center infrastructure and teach troubleshooting of LAN, SAN, and Cisco Data Center Unified Fabric. In addition, this option emphasizes other Cisco technologies, including Cisco UCS and Cisco ACI. After the completion of the program, the individuals will be fluent in the methodologies that help identify various issues that occur in data center network architecture. More importantly, by the exam time, every applicant should also learn how to work with Cisco MDS, Cisco Nexus switches, and other Cisco network devices. All in all, it is a 5-day instructor-led course that also includes hands-on labs that will help you master your practical skills. The learners have the option to choose between virtual training, in-classroom sessions, or self-study eLearning. Nonetheless, before enrolling for this course, the interested individuals must be familiar with MAN and SAN on Cisco Nexus and MDS switches along with Cisco Unified Computing and Cisco ACI.
Introduction to Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam
The Troubleshooting Cisco Data Center Infrastructure (DCIT) v7.0 course shows you how to troubleshoot LAN, SAN, Cisco Data Center Unified Fabric, Cisco Unified Computing System (Cisco UCS), and Cisco Application-Centric Infrastructure (Cisco ACI). You will learn methodologies and tools to identify issues that may occur in data center network architecture. You will get extensive hands-on practice troubleshooting installation, configuration, and interconnectivity issues on Cisco Multilayer Director Switch (MDS) switches, Cisco Nexusî switches, Cisco Fabric Extenders (FEXs).
NEW QUESTION 49
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. The same Fabric Name value should be used before after wiping all devices.
- B. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
- D. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
Answer: C
NEW QUESTION 50 
Refer to the exhibit. Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?
- A. Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.
- B. Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.
- C. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.
- D. Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
Answer: A
Explanation:
Section: Network
NEW QUESTION 51
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)
- A. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch.
- B. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.
- C. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices.
- D. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.
- E. Disable first-hop redundancy.
Answer: D,E
Explanation:
Section: Network
NEW QUESTION 52
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. Restore UCSM configuration from backup.
- B. Use AutoInstall to reinstall the firmware.
- C. Roll back to the previous firmware.
- D. From the peer IOM, reset the faulty module.
Answer: C
Explanation:
Section: Management and Operations
NEW QUESTION 53
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 54
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?
- A. The same Fabric Name value should be used before after wiping all devices.
- B. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
- D. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
Answer: C
NEW QUESTION 55
An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)
- A. Leaf nodes must connect to spine nodes only.
- B. A Cisco APIC must be attached to leaf nodes.
- C. A Cisco APIC must be dual-attached to two separate spine nodes.
- D. A Cisco APIC must be attached to a spine node only.
- E. Spine nodes must connect to other spine nodes.
Answer: A,B
Explanation:
Section: Network
NEW QUESTION 56
Refer to the exhibit.
An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?
- A. Configure each uplink to be a member of a separate LACP port channel.
- B. Configure the pinning max-link as 2.
- C. Configure destination-mac load balancing on N5K-Core-1
- D. Configure source-destination load balancing on N5K-Core-1.
Answer: B
Explanation:
https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/n5k/commands/pinning-max-links.html
NEW QUESTION 57
Refer to the exhibit.
A PC belongs to VLAN 68 The user experiences a large amount of packet loss when communicating with hosts that are outside of VLAN 68. Which action resolves the problem?
- A. Remove the HSRP configuration
- B. Replace HSRP with GLBP
- C. Enable the peer-gateway feature
- D. Configure ip arp synchronization on both switches.
Answer: C
Explanation:
I assume that the PC is sending traffic with destination MAC of Nexus physical interfaces. If more snap shots about this question are available, please share.
NEW QUESTION 58
A server administrator attempts to change the Cisco IMC KVM certificate to one that is signed by a private CA, but the certificate is not accepted. What causes this process to fail?
- A. omitting the public IP address of the Cisco IMC in the SAN
- B. using RSA encryption in the generation of the certificate
- C. using a certificate with a password-protected private key
- D. using AES encryption in the generation of the certificate
Answer: C
Explanation:
Section: Management and Operations
NEW QUESTION 59
An engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch.
Which action allows DCBX to successfully negotiate?
- A. Enable LLDP.
- B. Enable Cisco Discovery Protocol.
- C. Enable ETS
- D. Enable PFC.
Answer: A
Explanation:
Section: Storage Network
Explanation
NEW QUESTION 60
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?
- A. Verify that the SFPs are supported.
- B. Run the switchport ignore bit-errors command on the interface.
- C. Change the SFP to operate at 4 Gbps instead of 2 Gbps.
- D. Run the shutdown and then no shutdown command on the interface.
Answer: B
Explanation:
Section: Storage Network
NEW QUESTION 61
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. event-default action statement
- B. IP address of the SNMP server
- C. policy-default action statement
- D. event statement
Answer: B
NEW QUESTION 62
Refer to the exhibit.
Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?
- A. Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.
- B. Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.
- C. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.
- D. Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
Answer: A
NEW QUESTION 63
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. environment variable
- B. event-default action statement
- C. configure terminal action
- D. event statement
Answer: D
NEW QUESTION 64 
Refer to the exhibit. The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. event-default action statement
- B. IP address of the SNMP server
- C. policy-default action statement
- D. event statement
Answer: B
Explanation:
Section: Automation
NEW QUESTION 65
Refer to the Exhibit.
An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?
- A. Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- B. Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.
- C. Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.
- D. Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.
Answer: D
NEW QUESTION 66
Refer to the exhibit.
When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
- A. Port 15 is configured for 4-Gb FC.
- B. Port 15 is missing a license.
- C. The polarity of the fiber cable is reversed.
- D. Port 15 is configured as an Ethernet port.
Answer: A
NEW QUESTION 67
Refer to the exhibit.
A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Eth1/7?
- A. IOM host interface
- B. server interface
- C. IOM network interface
- D. fabric interconnect uplink interface
Answer: D
Explanation:
Explanation
E1/7 is border interface, which is used as uplink. All other veth interfaces are SIF, which stands for Server Interface.
NEW QUESTION 68
Refer to the exhibit.
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
- A. action 2.0 event-default
- B. event policy-default count 1 time 100
- C. event cli match 'configure terminal'
- D. event syslog occurs 10
Answer: A
NEW QUESTION 69
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Statically configure the target information in the Boot Policy.
- B. Configure an MTU size of 9000 on the appliance port.
- C. Configure a QoS policy on the vNIC.
- D. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
Answer: A
NEW QUESTION 70
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- B. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- C. Reconfigure the initiator and the target to be in the same zones.
- D. Reactivate the zoneset.
Answer: C
NEW QUESTION 71
Refer to an exhibit.
An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
- A. Use the same system image as the kickstart image.
- B. Reload the same system image.
- C. Load a new system image.
- D. Save the system image in NVRAM.
Answer: C
NEW QUESTION 72
......
Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certified Professional salary
The average salary of a Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certified Expert in:
- United State - 80,000 USD
- India - 16,00,000 INR
- Europe - 66,000 EURO
- England - 62,000 POUND
Verified Pass 300-615 Exam in First Attempt Guaranteed: https://www.actualtorrent.com/300-615-questions-answers.html
Free 300-615 Sample Questions and 100% Cover Real Exam Questions : https://drive.google.com/open?id=1dzOyZuYx9jpItHWKGQc8Adv-Pm7kAIm_