2024 1Y0-440 exam torrent 1Y0-440 Study Guide [Q47-Q72]

2024 1Y0-440 exam torrent 1Y0-440 Study Guide

Easily pass 1Y0-440 Exam with our Dumps & PDF Test Engine

Candidates can also use study guides and practice exams to prepare for the Citrix 1Y0-440 Certification Exam. These resources are designed to help candidates identify their strengths and weaknesses and to focus their study efforts on the areas where they need the most improvement.

Citrix 1Y0-440 exam is intended for IT professionals who have experience in designing and implementing Citrix networking solutions. 1Y0-440 exam is suitable for architects, consultants, engineers, and administrators who work with Citrix products and solutions. Architecting a Citrix Networking Solution certification exam is vendor-neutral, which means that the skills and knowledge tested in the exam are not specific to any particular vendor or product. 1Y0-440 exam format consists of multiple-choice questions and simulations, and candidates have 180 minutes to complete the exam. Upon passing the exam, the candidate will be awarded the Citrix Certified Professional - Networking (CCP-N) certification, which is recognized globally as a mark of excellence in Citrix networking solutions.

The Citrix 1Y0-440 exam covers a wide range of topics, including designing and deploying Citrix ADC (formerly known as NetScaler) solutions, securing Citrix networking solutions, optimizing traffic, managing and monitoring Citrix networking solutions, and troubleshooting Citrix networking solutions. 1Y0-440 exam format includes multiple-choice questions, drag and drop questions, and simulation-based questions. 1Y0-440 exam is proctored and can be taken online or in-person at a Citrix testing center.

NEW QUESTION # 47
Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.
The requirements captured during the design discussion held for a NetScaler design project are as follows:
* Two (2) pairs of Citrix ADC MPX appliances deployed in the DMZ and internal network.
* High Availability will be accessible for each Citrix ADC MPX
* The external Citrix ADC MPX appliance will be deployed in multi-arm mode.
* The internal Citrix ADC MPX will be deployed in single-arm mode wherein it will be connected to Cisco ACI Fabric.
* All three (3) Workspacelab sites: Dc, NDR and DR, will have similar Citrix ADC configurations and design.
How many Citrix ADC MPX appliances should the architect deploy at each site to meet the design requirements above?

A. 0
B. 1
C. 2
D. 3
E. 4
F. 5

Answer: B

NEW QUESTION # 48
A Citrix Architect needs to configure advanced features of Citrix ADC by using StyleBooks as a resource in the Heat service.
What is the correct sequence of tasks to be completed for configuring Citrix ADC using the Heat stack?

A. 1. Install Citrix ADC Bundle for OpenStack
2 Add Citrix ADC instances (Optional)
3. Create service packages (Add OpenStack tenants)
4. Prepare the HOT by using the Citrix ADC Heat resources and Citrix ADC Network Resource
5. Register OpenStack with Citrix Application Delivery Management
6. Deploy the Heat stack
B. 1. Install Citrix ADC Bundle for OpenStack
2. Deploy the Heat stack
3. Register OpenStack with Citrix Application Delivery Management
4. Add Citrix ADC instances (Optional)
5. Prepare the HOT by using the Citrix ADC Heat resources and Citrix ADC Network Resource
6. Create service packages (Add OpenStack tenants)
C. 1. Install Citrix ADC Bundle for OpenStack
2 Register OpenStack with Citrix Application Delivery Management
3. Add Citrix ADC instances (Optional)
4. Create service packages (Add OpenStack tenants)
5. Prepare the HOT by using the Citrix ADC Heat resources and Citrix ADC Network Resource
6. Deploy the Heat stack
D. 1. Install NetScaler Bundle for OpenStack
2. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource
3. Register OpenStack with NMAS
4. Deploy the Heat stack
5. Add NetScaler instances (Optional)
6. Create service packages (Add OpenStack tenants)

Answer: C

Explanation:
Explanation
-
Workflow to configure ADC instances using Heat

NEW QUESTION # 49
Scenario: A Citrix Architect needs to assess an existing on-premises NetScaler deployment which includes Advanced Endpoint Analysis scans. During a previous security audit, the team discovered that certain endpoint devices were able to perform unauthorized actions despite NOT meeting pre-established criteria.
The issue was isolated to several endpoint analysis (EPA) scan settings.
Click the Exhibit button to view the endpoint security requirements and configured EPA policy settings.

Which setting is preventing the security requirements of the organization from being met?

A. Item 1
B. Item 2
C. Item 4
D. Item 3

Answer: D

NEW QUESTION # 50
Scenario: A Citrix Architect has configured two MPX devices in high availability mode with version 12.0.53.13 nc. After a discussion with the security team, the architect enabled the Application Firewall feature for additional protection.
In the initial deployment phase, the following security features were enabled:
IP address reputation
HTML SQL injection check
Start URL
HTML Cross-site scripting
Form-field consistency
After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
Application Firewall should retain the response of form field in its memory When a client submits the form in the next request. Application Firewall should check for inconsistency in the request before sending it to the web server All the requests dropped by Application Firewall should receive a pre-configured HTML error page with appropriate information.
The Application Firewall profile should be able to handle the data from the RSS feed and an ATOM-based site.
Click the Exhibit button to view an excerpt of the existing configuration.

What should the architect do to meet these requirements?

A. Modify existing profile settings, change HTML settings, and ensure to exclude uploaded files from security checks.
B. Delete the existing profile and create a new profile of type: XML Application (SOAP)
C. Create a new basic profile and use pre-existing HTML settings.
D. Modify the existing profile to include sessionization

Answer: D

NEW QUESTION # 51
Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment. Click the Exhibit button to view additional requirements identified by the architect.

Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?

A. Source IP hash
B. Least packets
C. Static proximity
D. Dynamic round trip time (RTT)
E. Least response time
F. Least connections

Answer: C

NEW QUESTION # 52
Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?

A. Testing steps were integrated.
B. A phased roll out was completed.
C. Existing networking infrastructure is ready.
D. The project manager agrees with road map timelines.
E. The redundancy deployment decision was made.

Answer: D

NEW QUESTION # 53
Scenario: A Citrix Architect has sent the following request to the NetScaler:

Which response would indicate the successful execution of the NITRO command?

A. 0
B. 1
C. 2
D. 3

Answer: B

NEW QUESTION # 54
For which three reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new NetScaler in an existing environment? (Choose three.)

A. Establish and prioritize the key drivers behind a project.
B. Determine operating systems and application usage.
C. Understand the skill set of the company.
D. Identify other planned projects and initiatives that must be integrated with the design and build phase.
E. Assess and identify potential risks for the design and build phase.

Answer: C,D,E

NEW QUESTION # 55
Scenario: A Citrix Architect captured the following requirements during a design discussion held for a Citrix ADC design project.
* There will be a pair of Citrix ADC MPX appliances deployed in the DMZ and another pair deployed in the internal network
* High availability will be accessible for each Citrix ADC MPX appliance in both the DMZ (external) and
* LAN (internal) networks
* DMZ Citrix ADC MPX appliances will have GSLB configured and deployed in Active/Passive mode
* Load balancing for the internal Microsoft Exchange servers will be configured on the internal Citrix ADC appliances
* Load balancing for SAP application servers in the DMZ will be configured on the DMZ Citrix ADC appliances
* For the DMZ Citrix ADC MPX pair, the data and management traffic will be sent over the same interface.
* The DMZ Citrix ADC MPX pair will have three interfaces available.
The users from the DMZ should NOT have access to servers in the internal zone Which deployment mode should the architect use to deploy the Citrix ADC pair in the DMZ?

A. Two-Arm Mode
B. Hybrid Mode
C. Transparent Mode
D. One-Arm Mode

Answer: D

NEW QUESTION # 56
Scenario: A Citrix Architect has set up Citrix ADC MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customer s security team: The Citrix ADC MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP, TOP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests the virtual server level instead of the service level.
* should provide access to resources on the basis of priority.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets. compromised webservers, known spammersThackers. and phishing proxies.
* should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on a predetermined header length, URL length, and cookie length.The device should ensure that characters such as a single straight quote (') backslash (): and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect implement to meet these requirements?

A. Configure HTML SQL injection check on Application Firewall and enable Transform SQL special characters.
B. Configure HTML cross-Site scripting and enable Check Request headers.
C. Configure HTML SQL Injection check on Application Firewall and enable Block SQLSplCharANDKeyword.
D. Configure signatures manually and apply them to the Application Firewall profile.

Answer: A

NEW QUESTION # 57
Scenario: More than 10,000 users will access a customer's environment. The current networking infrastructure is capable of supporting the entire workforce of users. However, the number of support staff is limited, and management needs to ensure that they are capable of supporting the full user base.
Which two business driver is prioritized, based on the customer's requirements?

A. Increase Security
B. Reduce Costs
C. Enable Mobile Work Styles
D. Simplify Management
E. Increase Scalability
F. Increase Flexibility

Answer: B,F

NEW QUESTION # 58
Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the Citrix ADC design project:
A pair of Citrlx ADC MPX appliances will be deployed in the DMZ network and another pair in the internal network.
High availability will be accessible between the pair of Citrix ADC MPX appliances in the DMZ network.
Multi-factor authentication must be configured for the Citrix Gateway virtual server.
The Citrix Gateway virtual server is integrated with the StoreFront server.
Load balancing must be configured for the StoreFront server. *Authentication must be deployed for users from the workspacelab.com domain.
The Workspacelab users should be authenticated using Cert Policy and LDAP.
All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.
Single Sign-on must be performed between StoreFront and Citrix Gateway. After deployment the architect observes that LDAP authentication is failing.
Click the Exhibit button to review the output of aaad.debug and the configuration of the authentication policy.

What is causing this issue?

A. Password used is incorrect
B. UserNamefield is set as subjecticn
C. IdapLoginName is set as sAMAccountName
D. User does NOT exist in database

Answer: B

NEW QUESTION # 59
Under which two circumstances will a service be taken out of the slow start phase with automated slow start? (Choose two.)

A. The percentage of traffic that the new service must receive is greater or equal to 50.
B. The request rate has been incremented 100 times.
C. The service does NOT receive traffic for three successive increment intervals.
D. The server request rate parameters are set above 25 requests per second.
E. The actual request rate is slower than the new service request rate.

Answer: C,E

NEW QUESTION # 60
Scenario: A Citrix Architect needs to plan for a customer environment in which more than 10,000 users will need access. The networking infrastructure needs to be able to handle the expected usage.
Which business driver should be prioritized based on the customer's requirement?

A. Enable mobile work styles
B. Increase flexibility
C. Increase Security
D. Reduce Costs
E. Simplify management
F. Increase Scalability

Answer: F

NEW QUESTION # 61
Scenario: A Citrix Architect needs to design a new Citrix ADC Gateway deployment to provide secure RDP access to backend Windows machines.
Click the Exhibit button to view additional requirements collected by the architect during the design discussions.

To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a
_________ solution. (Choose the correct option to complete the sentence.)

A. ICAProxy; single gateway
B. ICAProxy, stateless gateway
C. CVPN; single gateway
D. CVPN; stateless gateway

Answer: C

NEW QUESTION # 62
Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.

Which configurations should the architect change to meet all the stated requirements?

A. Item 5
B. Item 3
C. Item 1
D. Item 2
E. Item 4

Answer: C

NEW QUESTION # 63
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* About 3,000 remote users are expected to regularly access the environment
* Multi-factor authentication should be used for all external connections
* Solution must provide load balancing for backend application servers
* Load-balancing services must be in Location B
Click the Exhibit button to view the conceptual environment architecture.

The architect should use ________ in Location A, and should use _________ in Location B.
(Choose the correct option to complete the sentence.)

A. Citrix Gateway as a Service, Citrix ICA Proxy (cloud-licensed)
B. No Citrix products, Citrix ICA Proxy (cloud-licensed)
C. Citrix Gateway as a Service, no NetScaler products
D. Citrix Gateway as a Service, Citrix ADC (BYO)
E. No Citrix products, Citrix ADC (BYO)
F. No Citrix products; Citrix Gateway appliance

Answer: D

NEW QUESTION # 64
Scenario: A Citrix Architect has set up Citrix ADC MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.
The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customers security team:
The Citrix ADC MPX device:
should monitor the rate of traffic either on a specific virtual entity or on the device It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP TCP. and DNS based requests needs to protect backend servers from overloading needs to queue all the incoming requests on the virtual server level instead of the service level should provide access to resources on the basis of priority should provide protection against well-known Windows exploits virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.
should block the traffic based on a pre-determined header length. URL length and cookie length. The device should ensure that characters such as a single straight quote ('): backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect configure to meet these requirements?

A. Configure pattern sets using regular expressions to block attacks
B. Configure IP address reputation and use IPREP and webroot to block the traffic
C. Configure signatures to auto-update and apply them to the Application Firewall profile
D. Configure Application Firewall with HTML cross-site scripting to block unwanted traffic
E. Configure Signatures manually and apply them to the Application Firewall profile

Answer: D

NEW QUESTION # 65
Scenario: A Citrix Architect has configured two MPX devices in high availability mode with version
12.0.53.13 nc. After a discussion with the security team, the architect enabled the Application Firewall feature for additional protection.
In the initial deployment phase, the following security features were enabled:
* IP address reputation
* HTML SQL injection check
* Start URL
* HTML Cross-site scripting
* Form-field consistency
* After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
* Application Firewall should retain the response of form field in its memory. When a client submits the form in the request, Application Firewall should check for inconsistencies in the request before sending it to the web server.
* All the requests dropped by Application Firewall should get a pre-configured HTML error page with appropriate information.
* The Application Firewall profile should be able to handle the data from the RSS feed and an ATOM-based site. Click the Exhibit button to view an excerpt of the existing configuration.

What should the architect do to meet these requirements?

A. Modify an existing HTML profile and disable 'Drop invalid security check'
B. Configure a new profile with web 2.0 and use the previously used Application Firewall security checks.
C. Configure a new profile with XML and use previously used Application Firewall security checks.
D. Configure a new HTML profile and use previously used Application Firewall security checks.

Answer: B

NEW QUESTION # 66
Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:
* Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.
* High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
* Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
* The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.
* Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.
* The logon page must show the workspacelab logo.
* Certificate verification must be performed to identify and extract the username.
* The client certificate must have UserPrincipalName as a subject.
* All the managed workstations for the workspace users must have a client identifications certificate installed on it.
* The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.
* The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.
* The vendorlab users should be authenticated using Active Directory Federation Service.
* The user credentials must NOT be shared between workspacelab and vendorlab.
* Single Sign-on must be performed between StoreFront and NetScaler Gateway.
* A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.
* The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.
On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.
Click the exhibit button to view the configuration.

What should the architect do to correct this configuration?

A. Bind the Portal theme as Domaindropdown.
B. Bind the LoginSchema Policy Domaindropdown to priority 90.
C. Unbind LoginSchema Policy LDAP_RADIUS from the virtual server.
D. Bind the Default LoginSchema Policy as Domaindropdown.

Answer: D

NEW QUESTION # 67
Which two parameters are required to ensure that after authentication, the cookies can be transferred from browser to non-browser applications? (Choose two.)

A. Cookie should be Persistent cookie
B. Cookie type should NOT be HttpOnly
C. Cookie type should have Secure Flag enabled
D. Cookie type should be HttpOnly

Answer: A,B

NEW QUESTION # 68
A Citrix Architect needs to define the architect and operational processes required to implement and maintain the production environment.
In which phase of the Citrix Methodology will the architect define this?

A. Deploy
B. Assess
C. Design
D. Manage
E. Review
F. Define

Answer: C

Explanation:
Explanation/Reference: https://www.slideshare.net/davidmcg/designing-your-xenapp-75-environment

NEW QUESTION # 69
A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)

A. CPX; as a stand alone device
B. CPX; as part of a high availability pair
C. SDX; with less than 6 partitions and dedicated management interface
D. SDX; with no partitions as a stand alone device
E. MPX; as part of the cluster but Cluster IP is NOT configured

Answer: C

NEW QUESTION # 70
Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment. During the design discussions, the architect documents the key requirements about when to provide VPN access for incoming connections to the Citrix Gateway virtual server. Click the Exhibit button to view the requirements.

Which policy expression will meet these requirements?

A. Option B
B. Option A
C. Option C
D. Option D
E. Option E

Answer: B

NEW QUESTION # 71
A Citrix Architect has deployed NetScaler Management and Analytics System (NMAS) to monitor a high availability pair of NetScaler VPX devices.
The architect needs to deploy automated configuration backup to meet the following requirements:
* The configuration backup file must be protected using a password.
* The configuration backup must be performed each day at 8:00 AM GMT.
* The configuration backup must also be performed if any changes are made in the ns.conf file.
* Once the transfer is successful, auto-delete the configuration file from the NMAS.
Which SNMP trap will trigger the configuration file backup?