[2023] New HPE6-A69 exam Free Sample Questions to Practice
Cover Real HPE6-A69 Exam Questions Make Sure You 100% Pass
HP HPE6-A69 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 16
Match the BGP path selection criteria attributes (Each option may be used once, more than once, or not at all)
Answer:
Explanation:
NEW QUESTION 17
When an ArubaOS-CX switch uses the temporary copy of the coring state database, how does NetEdit validate if the configuration is correct?
- A. Syntax validation
- B. Deploy validation
- C. Semantic validation
- D. Planned validation
Answer: D
NEW QUESTION 18
Refer to the exhibit.
Which statement is true?
- A. Q1 and S1 are applied to all interfaces mat do not have a QoS override applied
- B. Q1 and S1 are applied to all interfaces.
- C. To be effective, both Q1 and S1 still need to be applied to Interfaces
- D. No default queues are changed
Answer: D
NEW QUESTION 19
The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway What is required for this configuration to apply QoS user-based rules for the R&D client traffic?
- A. Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic
- B. Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.
- C. Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.
- D. Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch
Answer: B
NEW QUESTION 20
A customer wants to verify the proposed configuration snippets to create a point-to-point link between Aruba Switch and a third-party switch.
Will this configuration work with static routing?
- A. No. the configuration will not work, because the Aruba Switch does not have a locally reachable IP address from the third-party switch.
- B. yes, the configuration should work fine and has no issues
- C. No. the configuration will not work because the Aruba Switch does not have the "routing" command on it
- D. No, the configuration will not work, because the Aruba Switch has an MTU mismatch which will prevent IP communication.
Answer: C
NEW QUESTION 21
Refer to the exhibit.
You want to protect the aggregation layer if the VSXISL falls. Where should you place a VSX keepalive link?
- A. On VSX LAG 101
- B. On VSX LAG 1
- C. On the OOBM ports of both aggregation switches
- D. On a dedicated link created using port 1'1/48 of each aggregation switch
Answer: C
NEW QUESTION 22
Refer to the exhibit.
Criteria
1. All outbound traffic to AS 64516 prefers Edge-2 to AS 64516
2. All other outbound traffic prefers Edge-1 to AS 64513
Given the customer connectivity depicted in the diagram which single change can be performed on Edge-2 to ensure the criteria are met?
- A. Configure Edge-2 with a route-map to 'set as-path prepend"' to apply 64516 two times to the neighbor for AS 64516.
- B. Configure Edge-2 to set the weight on specific routes specific to AS 64516 to 1.
- C. Configure Edge-2 to set ebgp-multihop 3 for the neighbor for AS 64516.
- D. Configure Edge-2 to set the local preference for specific routes originating from AS 64516 to 200 and all other routes from AS 64516 to 50
Answer: B
NEW QUESTION 23
When applying me following access-Iist to an ArubaOS-CX 6300 switch:
How does this ACL behave on the selected switch? (Select two.)
- A. The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.
- B. The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs
- C. The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.
- D. The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs
- E. The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.
Answer: C,D
NEW QUESTION 24
The customer is currently planning the migration of their current switches from the existing Aruba 5400R to ArubaOS-CX 6400. Which statements are correct about the mitigation of rogue DHCP servers with the selected product? (Select two )
- A. With Aruba CX 6400 configure dhcp-snooping for the selected VLANs with authorized servers
- B. DHCP snooping is supported on both IPv4 and IPv6
- C. DHCP snooping needs to be enabled per VRF basis on Aruba CX 6400
- D. DHCP snooping can be enabled on ArubaOS-CX switches, once it's disabled on ArubaOS switches for same VLANs
Answer: A,D
NEW QUESTION 25
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address.
What are the minimum steps that should be performed to mitigate this condition? (Select two)
- A. Enable 'arp inspections on the end-user VLAN.
- B. Enable 'arp inspection untrusted on the end-user physical pons
- C. Implement dhcpv4-snooping
- D. Enable 'arp inspection' on the end-user physical ports
- E. Implement arp ACLs to define trusted MAC address to IP bindings
Answer: A,E
NEW QUESTION 26
A customer is migrating from a Cisco VSS system to an ArubaOS-CX VSX cluster in order to provide default gateway functionality, the local network administrator creates VLAN interfaces The network administrator then migrates successfully from Cisco to Aruba The next day a manager asks if the solution is redundant. The network administrator realizes that there is no redundancy on the default gateway functionality What is the preferred solution with the least amount of configuration and disturbance?
- A. For every VLAN interface, configure an active gateway IP with the same IP address as already present in the first VSX node Configure this on both switches
- B. Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure active gateway IP with the default gateway address on every VLAN interface on Doth switches
- C. For every VLAN Interface, configure a VRRP IP address with the same IP address as already present in the first VSX node. Configure this on both switches.
- D. Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure VRRP with the default gateway address as virtual IP-address per VLAN.
Answer: D
NEW QUESTION 27
A customer is having a performance issue on the network and has received complaints about users experiencing Intermittent connectivity. After performing a packet capture, It is determined that there is unwanted UDP port 68 traffic being broadcast
6300W%wit
To mitigate this issue, which ArubaOS-CX 6300M switch feature would be best to implement?
- A. broadcast-limit
- B. private-vlan
- C. bcms-optimization
- D. dhcpv4-snooping
Answer: D
NEW QUESTION 28
(Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit.
An engineer has attempted to configure two pairs of switches in the referenced configuration it is required to implement VSX keep-alive at the aggregation layer.
The ports of the ArubaOS-CS 8325 switches used for Agg01 and Agg02 are populated as follows:
The configuration of switch AGG01 includes:
VSX keep-alive is not working. Which modification should you make lo resolve the error condition?
- A. Edit the vsx-sync command, adding "keep-alive"
- B. Modify the Interface lag 2 command, removing "multi-chassis"
- C. Modify the Keepalive peer 192.168.20.2 source 192 168.20.1 command, adding "vrf KA"
- D. Edit interface 1/1/48, adding the command "vpn-instance KA"
Answer: B
NEW QUESTION 29
You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?
- A. Setup a mirror session to generate a Tshark file.
- B. Check the configured VLANs using "show vsx config-consistency"
- C. Setup a mirror session to niter packets for TCPDUMP analysis
- D. Enable debug of vri with "console" set as the destination
Answer: B
NEW QUESTION 30
You have removed a member out of the ArubaOS-CX 6300 VSF configuration. The login to the removed member falls. What is true about switch login recovery?
- A. The zeroize task will remove all user passwords: the configuration remains on the switch
- B. The task requires physical access to the switch
- C. The zeroize task executes the zeroize.txt from the root of the CF card on the switch
- D. The task can be executed remotely
Answer: B
NEW QUESTION 31
Refer to the exhibit.
* For all traffic within VLAN 10. a remark action or DSCP value EF must be set
* For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION 32
When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services.
Which options are valid technical goals? (Select two.)
- A. Transform the process of acquisition of a new network solution from a CAPEX to an OPEX model
- B. Reduce the cost of wiring.
- C. improve the network throughput
- D. Accelerate the ordering process of new network hardware.
- E. Replace hardware that is reaching end of support with a technology refresh.
Answer: A,D
NEW QUESTION 33
Which statement is true about NAE scripts'?
- A. No script is installed on the system by default.
- B. The Health Monitor is the only script installed on the system by default.
- C. The System Resource Monitor and Health Monitor a/e the only scripts installed on the system by default
- D. The System Resource Monitor is the only script Installed on the system by default.
Answer: D
NEW QUESTION 34
......
Real HPE6-A69 Quesions Pass Certification Exams Easily: https://www.actualtorrent.com/HPE6-A69-questions-answers.html